Wind Power Coupling

    Wind power series conductive slip ring is commonly used to rotary encoders, it can rotate synchronously connected with the slip ring, while structure on the coupling as a transmission device used to connect the conductive slip ring and rotary encoder in the two shaft (driving shaft and driven Shaft) In the high-speed rotating power transmission, The coupling also buffer, reduce vibration and improve the dynamic performance of the shaft system. The coupling consists of two halves, which are connected to the driving shaft and driven shaft, respectively, Most of the general engine by means of coupling machine connected with work.

    Coupling is divided into cross coupling, spilt coupling, universal coupling, pin coupling, plum coupling, star coupling, flexible coupling, etc .; firstly work required to select the appropriate type, and then calculated the diameter of the shaft torque and rotational speed, moreover from the relevant manual to identify the applicable models, finally make necessary calculation for some of the key parts. Couplings have many varieties, type and specifications, on the basis of correct understanding their concept, according to the needs of the transmission system to select the coupling also can choose according to different products.

    In numerous standard coupling, correctly choose the best coupling for you needs, it not only related to mechanical products shaft drive performance, reliability, service life, vibration, noise, energy saving, transmission efficiency, transmission accuracy, economic and a series of issues, but also related to the quality of mechanical products. Our company currently selected for the cross coupling as shown above; cross coupling for the split, both ends of the metal, between the rubber, is divided into three parts. As the coupling is very sophisticated, the middle of the gap is very small, not very convenient assembly, cross coupling characteristic is able to bear a great force. But our encoder does not require great torque, According to the characteristics of our slip ring to find a more suitable Eight coupling as shown below.

    Eight coupling structure is simple, easy assembly, excellent flexibility, Even if the slip ring is a bit out of alignment with the encoder, it will not cause damage to the encoder. Encoder dedicated with high compensation and high toughness insulation couplings, eight coupling used in our slip ring, which can improve the assembly, structure, etc. Buffer vibration absorption, can compensate for the larger axial displacement, trace amounts of the radial displacement and angular displacement.