Ulysse Nardin Classico Manufacture Steel Enamel Dial Replica Watch

Ulysse Nardin Classico Manufacture steel enamel dial watch show a sleek and clean design, with a 40mm steel case, with refined proportions and lines (with a rather slim case, at 9.60mm). A bit of originality can be seen in the shape of the lugs and with a blue alligator strap, with curved ends. Inside the case ticks a modern in-house movement – Calibre UN-320 – with time, small second and date. This automatic movement features a silicon hairspring (remember that Ulysse Nardin was the very first manufacture to use silicon in 2001), a stop-second mechanism and boasts 48 hours of power reserve. More Ulysse Nardin replica watches.

The enamel dial is the perfect definition of high-end watchmaking, for the simple reason that it requires highly skilled craftsmen and a long process to achieve the desired result. The dial of the Ulysse Nardin Classico Manufacture stainless steel is manufactured by Donzé Cadrans, a subsidiary of Ulysse Nardin, which is one of the few ateliers to master the complex process of Grand Feu enamel. The process is based on an antique technique created during the 17th century. Its name is due to the extremely high temperature (in-between 760 and 900 celsius degrees) required to melt the enamel powder with the metallic plate. The result is a milky white dial which will resist to almost all the aggressions possible and that will keep its vitreous aspect for decades. In the case of the Ulysse Nardin Classico Manufacture, this enamel dial is printed with blue Roman numerals and the “Email Grand Feu” mention is visible at 6. The display relies on matching blued hands.

Ulysse Nardin Classico Manufacture Steel Enamel Dial Watch

Case: 40mm diameter x 9.60mm height – stainless steel – sapphire crystal on front and back – 30m water resistant
Movement: In-house Calibre UN-320 – Automatic – 48h power reserve – 28,800 vibrations/h – hours and minutes, small seconds, date
Strap: blue alligator leather with steel pin-buckle