Ultimate Guide to Connect WiFi Extender to Router

There are two simple and effective ways to connect wireless devices. One is by using the WPS button and another is by manual method. You can prefer any method as per with ease. To avoid any technical glitches follow the steps in the exact order to complete the process.

Using WPS Button  

The very initial method to connect the WiFi devices is using the WPS 

button. Follow these steps to connect the wireless range extender to a router using the WPS method.

Before you commence, be sure that both your WiFi extender and router have a WPS button on the front panel. As soon as you have confirmed that, you can proceed. 

I. First of all, unwrap your Linksys extender box and take out it from the pack. 

II. Confirm that all the parts in the box are not damaged.

III. Look for a spot near your router where you want to locate the extender. 

IV. Now, insert the WiFi extender into an active power socket. 

V. After that, turn on the extender by pressing the power button.

VI. Wait for a short while, till the power LED light starts blinking on the extender. 

VII. Once done, find the WPS button on the wireless extender and press it.

VIII. Do the same thing with the router i.e. locate the WPS button and hold it.

IX. Wait for a few seconds till the WPS light becomes visible on both devices.

Congratulations! You have successfully configured the Linksys WiFi extender using the WPS button. But, occasionally many people are not able to setup the wireless range extender using this method. If you are among the users then use another i.e. manual method to connect WiFi extender to router. 

Using Web GUI

1. Turn on Extender

Firstly, turn on the wireless range extender by inserting the power adapter of it into a well-working power socket. Subsequently, wait for a little while until the LED light blinks.

2. Connect Extender to Router

Next, take a quality Ethernet cable and connect it to the router and extender. Be sure that the Ethernet cable connection is secure.

3. Run a Web Browser

Once done, head over to an internet browser and type https://extender.linksys.com in the location field of it. Thereafter press Enter. Within a few seconds, the extender login page will display. On the off chance that it doesn’t load you will need to look up your WiFi extender’s IP address in your router.

4. Read the Terms & Conditions

Here, you will see the terms & conditions which you need to read precisely. Afterward, accept all the terms & conditions and click on the Next option. 

5. Connect to Extender Network

Now, select the extender network and create an eccentric name and WiFi name of the network. 

6. Create the Password

Eventually, create an admin password for your wireless range extender and click on the Save button. 

In the End

In this manner, you successfully connect the WiFi extender to router by using any method. We expect that with the help of this article, you will connect the wireless devices in a hassle-free way. If you liked this post do not hesitate to give a word of appreciation in the comment section.