If you wanna remote Garage door/Auto/RKE, TY90 universal remote
programmer is your best choice, English TY90 is easy to use, you can
easily Remote frequency detect and Frequency edit, remote data detect,
compare, edit, copy and data generate / regenerate etc. but if you used
5-6 month or even long, you want to update Ty90 multi functional remote programmer, please check it as follows:

The user can select the "system" option in the home menu, and then
view the system version of TY90 equipment currently useed, firmeare
version, device ID.
Maufacturers will be based on market develpment, strengthening its
own development, continue to upgrade the equipment, may be increased by
constantly adapting car and garage door remote data. the upgrade process
requires TY90 devices connected to the PC, without having to install
the driver, the upgrade file will be compressed form of release in
various forums, websites, dealer, simple upgrade operatio. permanently
free.

Click" TY90 upgrade package" the archive, and press the PC right
mouse button, click the extract to the current foler, as shown below:

After unpacking, found in the current foler " TY90 upgrade package"
folder, double-click will bring up a screen, as shown below:

then double-click the" TY90 upgrade the client", it will pop up a screen, as shown below:

At this time, the TY90 device USB power wire accessto the TY90 USB
connection interface. the other end connected to the PC USB interface.
whicle TY90 device in the shutdown state, press and hold the enter key "
O" and the home menu key, and then turn the power on, as shown below:

Note: at the same. press and
hold the enter key "O" and the home menu key, and then turn the power
on, namely: at the same time, hold the keys 8 and 10 not to release, and
then press the button 2 turn on.
In this case, the lift side of the blue light will contime to
blink, TY90 device screen does not light up, prove TY90 device into
upgrade mode.
Next, Open the TY90 upgrade the client on PC, according to the interface connctor, as shown belows:
If the connection is successful, the information of Bar TY90
upgrade the client interfacewill displays the connection is successful,
and " device ID" and " upgrade" Screen lights up,customers can click on
the "upgrade" buttton to upgrade.(if the connection is not sucessful,
check the connection TY90 device and the PC is firmly and unplug the USB
power cord and plug it, and then repeat the upgrade procesdure
After the upgrade is successful, TY90 upgrade client informaton bar
will show the upgrade was successful, and TY90 device will
automatically restart!
Select " system" option on the device after the restart, Users can
view the TY90 system version currently used, this way to verify whether
the upgrade is comple