Guides of Toyota/Lexus smart keys all keys lost via Lonsdor K518ise

by Nancy N. DIY diagnostic and car repair tools
Here are tips and guides of Toyota/Lexus smart keys all keys lost.


1) Binding
1.Go to the “Bind emulator key” function;
2.Turn on emulator key and put it into K518ISE key slot (put the status indicator down, make sure the key is active);
3.Following the system direction and click “OK” to start binding;
4.After binding completed, the system will indicate “Binding successful”.

Note: The KPROG-2 adapter is specialized for part of Volvo car series and the new Maserati for the time being. Lonsdor is still developing some more car models that the adaptor can support in the near future, such as Jeep Grand Cherokee, please refer to nandrepair.com or directly go to the”One key update” for latest news.

2)  Backup EEPROM data
Connect K518ISE with car OBD port, enter into “Backup immodata” to back up the data.

3)  Make emergency emulator key
After choosing the immo data, in a network environment, the system will indicate to choose the corresponding SKE emulator key model, please start the key and put it into K518ISE key slot(make sure the key is activate), follow the instruction to make an emulator key.

4)  Add smart key
Click the car start button, put the generated SKE emulator key close to the start button, with induction the car will automatically activated.
The system will read current key count, then follow the instruction to add key.

Precaution
1. “Bind emulator key” can identify the SKE emulator key binding state;
2. SKE emulator key need to bind K518ISE host and can bind only for one time;
3. When making emulator key, make sure well net connection and to choose the corresponding SKE emulator key model correctly.

Sponsor Ads

• Ad Space Available - Rent it Now!

Created on Nov 28th 2018 01:53. Viewed 800 times.

Comments