The Important Functions of Sieves Shaker
by Hemant Sharma Digital Marketing ManagerA Sieve Shaker can be hand
operated or run using motors powered by electrical energy. The procedure used
to assess the particle size distribution of a granular material is termed as a
Sieve Analysis.
Types of Sieves
- Perforated plate sieves
- Woven wire mesh sieves
- American standard sieves
The function of the sieves shaker is to expose the
particles in a sample to all the openings in each sieve in a stack. A sieve
stack forms on fitting each sieve to Sieve Stack for being used in a given
particle size analysis into the one above. The sieve that has the largest mesh
holes is at the top. Each of the subsequent sieves are of a tighter mesh size
than the one that is above it.
A sieve stack might consist
of anywhere between 1 and 18 sieves and the number and mesh sizes of the sieves
in a sieve stack are dictated by industry/application standards. They might
also depend on the stated production standards of specific products.
In concept, the optimal
motion of a sieve shaker is circular and vertical. In other words, the sieves shaker undergoes orbital motion.
While at first the motion is defined as “rotating the sieve in a person’s hand
and tapping it on the side”, the first practical mechanical shakers were made of
a rotating orbital table as well as a hammer which imparts, at a fixed
interval, a vertical force. This was called the Ro/Tap©, standing for “rotating
and tapping”. The name eventually became
the copyright of W.S Tyler. The first shakers were very noisy. Developments
eventually overcame noise and ended up providing an orbital motion of
sufficient violence included.
The effectiveness of any
sieve shaker depends upon the characteristics of the material which is being
sieve tested. The minimum size to be separated, the resistance to agglomeration
as well as the static electric factors Meinzer II Sieve Shaker play a role in
the selection of a shaker.
For example, the analysis of
dry silica sand is comparatively easy to separate down to 50 microns. While the
majority of sieve shakers would do an adequate job on this type of product, if
the material has the tendency to clump or agglormerate, a shaker that would
give the stack a periodic vertical shock which will end up giving better
results. If the material has a high static electricity characteristic methods wet
sieving may be needed.
When particles to be separated
are smaller than 50 microns, you can make use of other techniques. They may be
needed to effectively separate these small particles. Use of ultrasonic
agitation techniques often play. Another method involves the use of a vacuum in
order to pull small particles via the sieve openings. Such vacuum equipment
usually processes through one sieve at a time.
The purpose of sieve shaker
is clear is to expose the sample to all the openings in a sieve in a manner
which will expedite the passing of particles that are smaller than the
openings. You can buy sieve shakers online at unbeatable prices. The products are
guaranteed to be of good quality and are available round the clock.
Sponsor Ads
Created on May 21st 2019 03:08. Viewed 273 times.