The features of alloy coiled reinforced bar

Alloy coiled reinforced bar is an flexible waterproof material which is made  of the raw materials such as lead, tin, antimony and other metals and  processed into flake rollable,(referred to as: PSS alloy waterproofing membrane). The membrane has excellent corrosion resistance, puncture resistance roots, weldability and long service life, which has achieved excellent waterproof effect and appreciation from the owners and waterproof units. Today, there are plenty of building steel manufacturers sale this kind of products in the market.

 

When using the full bonding method Stones roll, it can be used as an aid to double-sided cold self-adhesive membrane waterproofing membrane layer and serves as an adhesive layer. It can be self-adhesive membrane after construction paving place, release paper side torn surface, roll shop PSS alloy sheet edge in time. The web lap joint width should be no less than 5mm. Lap joint should be straight, without distorting. Two adjacent coils of the short side lap joint should be staggered over 500mm; with empty shop law laying membrane, the membrane can be laid directly on a clean cement mortar layer. If you want to buy it, you can go to a high quality hot rolled deformed bar wholesale. In this case, youcan get one at a reasonable price.

 

Lap joint on both sides of 5mm within range should be cleared, edge roll joints oxide layer should be coated with a saturated alcohol rosin flux and then tighted with a rubber hammer, then processed with special welding equipment for welding construction. During the welding process, membrane joints should overlap closely, and the entire weld requirements straight, uniform, full, closed tight phenomenon can not be dented. If you don’t know the above methods, then you won’t make full use of it even if you buy alloy deformed bar.