Replaster is the Answer To These 4 Common Pool Plaster Problems

The layers of plaster that cover your swimming pool is being done to avoid the problem of leakage so as to make sure that the water remains enclosed within the pool. There are available so many types of pool plasters that you can choose from, and no matter which one you pick, the possibility of plaster problems usually persist. It's not always something that the contractor to be blamed for, there are certainly other “Defects in Materials or Workmanship” that can cause plaster discoloration, cracking, etching and delamination. 

If the pool plaster issues are not diagnosed and dealt with quickly and effectively by a professional team specializing in pool replaster in Houston, serious damage and expensive repairs will be the consequence. Moreover, new plaster finishes are flawlessly brilliant and without any visible defects for years and replaster is the answer to these 4 common pool plaster problems. Check How.

CRACKED PLASTER – Although pool plaster is water resistant, yet it is not completely immune to the pressure of the pool water on top of it. Cracked plaster is most often seen on the top steps of a plastered pool, but can also be witnessed through the walls and floors in few cases. Cracked plaster is most common problem where the low-quality material is being used. Sometimes, climate can also be the reason for cracked plasters, especially if you live in the region that experiences extremes climate. If you see any kind of cracks on the surface of your pool plaster, call a professional team immediately. If left unattended, the crack with each passing day will keep on becoming bigger, and then one day the disaster will strike.

DISCOLORATION – Wearing and tearing of color is natural with pool plaster and this process is further exacerbated by water pressure and composition. The discoloration of the plaster ruins the aesthetic appeal of your pool. Discoloration of a newly plastered pool can occur within the first few months and years of plastering. If you too are facing this problem with the pool in your backyard, it is highly recommended to either completely change the pool finish or get it plastered with a reliable product. This too being not a DIY job, so call a professional pool replaster team to get the job done.

ETCHING/SCALING/FLAKING – If the pool water contains minerals or if it is too acidic, the it will result in the development of chemical patches known as scaling. Etching occurs when spots of new plaster have separated from previous plaster layers. It usually occurs on steps and swimsuits, around wall fittings, pool lights and under the tile line. No one wants to see flakes of plaster floating in a pool, so contact an expert to sort out the problem today. And the best suggestion is to get your pool replastered again or completely renovated.

BOND FAILURE – If you are building a new swimming pool, it is vital to know what adhesive has been used to bond the components of the pool plaster together. If low-quality adhesive has been used in pool construction, then there are possibilities that in the near future the plaster can become loose and this can compromise the integrity of the entire pool floor. A team of pool experts can remove the plaster and then use a better-quality adhesive to bond it together again.

If your swimming pool is going through all or any of the aforesaid common pool plaster problems, you need to contact a professional team specializing in pool replaster in Houston to either fix the existing issue or remove the plaster altogether and replace it with better-quality material. If you make yourself aware of the cost-effective and suitable solutions for pool plaster problems, then you can quickly fix it, before they become big and need costly repairs.