Quick Guide to MG3620 Canon Printer Wi-Fi Setup

Are you looking for the best solutions to MG3620 Canon printer wifi setup? If yes, then you are in the right place where you get the perfect solution. Here, we discuss the complete procedure to set up the canon printing machine. Through the given process you can easily set up your machine. Canon printing machine is made as per users requirements. This is very simple and easier and it also supports the multiple functionalities which means a user can print and scan the documents from anywhere in the home or office. This printing machine will save your time as well as effort. If you are not a tech-savvy guy then don’t worry. The setup process is a very simple task. If you can’t set up your printing machine by applying the below-mentioned steps then you can also contact the experts to get the proper guidance. The professionals will guide you to solve this issue as soon as possible. You can take the help of professionals through Canon printer customer care number +(1)-888-846-5560. 

Guidelines Before Setup

Before performing then setup process you need to check the access point of the router and the configuration of your device is done. Make sure that the system is connected to your operating system. Then, note down some network information that is based on a network connection.

• If the network is not secured, there is a lot of risk of leaking your important data such as your personal information.

• Make sure that your printing machine does not work over a wireless and wired connection at the same time.

• If you face any trouble with the network connection, perform a network setup troubleshooting process.

Process for MG3620 Canon Printer Wi-Fi Setup

• At first, press and hold the stop key, if the Wi-Fi light is blinking in the printer.

• Now, tap and hold the B button on the printer until the On light flashes.

• After that, press the color button and then click the Wi-Fi button. Check that the Wi-Fi light is blinking or not. Then, make sure that the On light is lit.

• If you want to finish the setup process, then you need to install the software and driver on your operating system.

• Now, insert the CD and browse the CD-Rom folder. Now the setup program will start automatically.

• After that, go to the exe.file to proceed to the installation process.

• When any dialog box appears, press the start setup button.

• Now, try to follow the instructions on the screen and select your country, license agreement and many more.

• Then choose “ Choose connection method” and then press the “wireless LAN connection” option. Then press next.

• When a window will appear, choose “ connect via a wireless router” and then select Next. 

• Then, a connection completed screen appears. Choose the next option to run the process.

• When the setup complete window appears, select the next option.

• Then, choose your printer from the “ printer on network” list and select “ Next.”

• Now, press ‘Next’ when a software installation list appears.

• When the ‘installation completed successfully’ window comes on the screen press the ‘exit’ option.

• In the last, the setup process is done. So, check if you can print any document properly or not.