How to setup wireless HP OfficeJet 8702 Printer?by Stella M. Marketing Executive
How to setup wireless HP OfficeJet 8702 Printer?
HP printer is known for its amazing work. Through the help of this machine, you can easily print your documents and images. But sometimes users ask how to set up an HP printer. If you have the HP OfficeJet 8702 printing device and you want to set it up. Then you are in the right place. Here, we will provide you with one of the best solutions as soon as possible. By following this article, you can easily set up your printing device. To complete this process, you can also take the help of professionals. They have many years of experience in this field. They will provide you with one of the best solutions as soon as possible. To contact the experts you can call on HP printer support number +(1)-888-846-5560 with ease.
Steps to Setup HP officeJet8702 printer
To setup OfficeJet 8702 printer wireless in the Windows operating system, first of all, you are required to check for its compatibility. Create the proper communication between printer and system either a wired or a wireless one.
For the first time, if you are installing or set up the wireless setup of the HP OfficeJet 8702 Printer. Use the following steps to the wireless setup of the HP OfficeJet 8702 printer.
Remove Printer from the box
Remove the printer from the box.
Remove the entire packing materials from the outside of the printer.
Remove the film from the printer control panel
Lift the scanner lid, replace the packing material from scanner glass then close the scanner lid.
Connect the power cord and set preference
Connect the power cord to the rear of the printer then plug the other end of the power cord into an electrical socket.
Switch on the printer.
To set preferences on the printer control panel select the preferred language and country/ region then hit Ok to confirm your selection.
If prompted, select the time and date then tap yes to confirm
Load tray into the input tray
Replace the input tray then remove the packing material.
Load plain white paper into the input tray.
Push the stack into the tray and wait for a few seconds until it stops.
Slide in the paper width guides until they rest against the edge of the paper.
Insert the input tray into the printer.
Install the setup ink cartridges
Open the ink cartridges access door.
Wait for a few seconds until the carriage stops moving before you continue.
Insert the ink cartridge into its slot.
Close the ink cartridges access door after completing the process.
After applying the above methods install the driver of HP OfficeJet 8702 by using the installation CD. In the last setup, the Printer over USB wired or wireless network connection
Through the help of the above solutions, you can easily set up your printing device. In case if you are facing any problem during the process then you can contact the HP printer tech support team.
Created on Feb 3rd 2020 22:10. Viewed 234 times.