Nine Lighting Tips for Wedding Photographers for Capturing Reception

A wedding in India is the perfect place to by standing some of the eccentricities of India. Globally wedding photographers confess that Indian weddings are indeed among the toughest to shoot. If you ask a Wedding Photographer in Kolkata that how difficult it is to shoot an Indian Wedding.As unendurable as it can get.

When it comes down to it, the reception of any Indian can prove to be the most crucial part of a wedding with the presence of so many variables which is not in your control. You are plunged in a low light scene, provoked to work with the DJ’s light setup, and you have no choice but to adjust. Here are 9 tips to help you overcome any possible lighting hurdles that get in the way of delivering exceptional images to your clients:

1. Placing Lights according to the situation: Most lighting conditions cause photographers stress due to lack of putting together for the scene they’re shooting in. Place flashes in the far nooks of the banquets, where you know you will need a jolt of light or in areas that require a backlight to pull the subject out from dark backgrounds. Raise them to about 6 feet to keep away from having shadows cast from any of the seated invitees, and zoom them all the way in to prevent any light upset.
2. Matching the Color of Light: There is no point of adding additional light if it isn’t the right kind. Match your on-camera flash and off-camera flash to the surviving light in the room. Depending on the temperature of the surrounding light (Tungsten, Daylight, etc.), dial in a Custom Color Temperature setting in-camera to balance out the light in your scene.
3. Customization or Modification of Light Sources: If you have already through step 1 and step 2, then your present job will be setting out the off-camera flashes to create more guided and directional light sources.
4. Aperture Settings:  The aperture is dependent on which lens you are using but keeps in mind you want a wider aperture to let in more light. It will vary influencing your available in-house light and the power of your camera. In low light, we recommend shooting at around 1/200th of a second, at anywhere from ISO 800-3200.
5. Bouncing On-Camera Flash: In case you’re in a venue where the ceiling is wooden or painted then you need to make use of your surroundings and find walls or objects to bounce your light off of.
6. Coordination with DJ for the lighting: Talk to the DJ about which lights will stay continual and which will be added later on throughout the night. As a professional Wedding Photographer in Kolkatacover all your primary shoots so you can focus on creativity and not worry about anything messy.
7. Controlling Flash: Having a full-featured flash or flash trigger that acts as a master and controls your off-camera flashes gives you the potential to decide when it is necessary to add light to your scene.
8. Creative Effects: You can use inexpensive LED lights along with flashes to make perfect foreground bokeh to add a bit flare to moment.
9. Using Direct Flash on Dance Floor: When the dance floor is slowly gradually diminishing down and you find yourself left with three people to photograph, slow down your shutter and use a direct flash to preserve them in motion while sending the background into a blurred agitation.

Knowing what lights you need and where they need to be placed will lay the substratum for the rest of your night, so make good use of these 9 tips before your next shoot!

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Jan 17th 2019 11:49. Viewed 404 times.

Share on APSense

Comments