MJ ACT PRO iPhone Chip Repair Tool user manual

by Nancy N. DIY diagnostic and car repair tools The latest MIJING ACT PRO iPhone chip repair tool is an efficient equipment that available for reading and writing datas on iPhone 4S/5G/5C/5S/6G/6S/6SP/SE/7G/7P models, repairing flash error 1.3.6.16.47.48.1669 and 3G/4G signal faults on 4S/5G/5S/5S models. Also, it can reset and repair PC BIOS. but do you know how to use MJ ACT PRO iPhone Chip Repair Tool?



Operation Guide

• Software Download
1. Contact seller or log in MIJING official website "www.fsmijing.com"
2. find "download" - "下载中心" click into the page
3. find "Mi Jing Cloud Software"- 米景云平台“ to download and install
4. Run the software and find " drivers" - "驱动安装“ in the menu
5. Choose " CH341(码片）”drivers to install and reset your computer



Chip Data writing and Reading Operation

1. Remove the motherboard baseband CPU you need to repair
2. Choose the " mainboard fixed chassis" for corresponding mainboard
3. Install mainboard on"mainboard fixed chassis" and fasten it by "fixed lever"
4. Run "Mi Jing Software" and click "Instrument" in menu - Chosse "Chip Repair Instrument" mode
5. Connect data cable to ACT PRO chip repair tool and computer USB port
7. Save the data file in computer after the reading is done.

(How to check the chip data is normal？It depends on whether you can read data on the left dialog box, otherwise, if there is blank, it means you get wrong operation or damaged chip" ）

Note:
For repairing flash error 1.3.6.16.47.48.1669 and 3G/4G signal faults on 4S/5G/5S/5S models, click the right side on software " 修复码片数据“ multioptions - Choose corresponding model repair options - Software will note the file you need to repair - Choose the chip file you saved in computer - Rename the repaired file and save in computer- Click "Erase Data" to erase chip data in mainboard before writing new one - Click " Open" to choose repaired file -  Click " Write" so you can write datas in mainboard chip - Remove the mainboard as soon as the writing process is done,  and connect computer flash IOS firmware to be in progress of repair operation.

8. Remove mainboard from ACT PRO chip repair tool and restall the new chip or mainboard you need to writing( Baseband CPU removing is essential)
9. Click the "Read" option, there is no need to save in computer
10. Click "Open" to choose the chip data saved in computer and click "Write"

Note:
For writing datas on iPhone 4S/5G/5C/5S models, you must erase data first, click " Erase Data" then you can wtrite data.
For other iPhone models : 6G/6P/SE/6S/6SP/7G/7P, this step can be passed.

11. Remove chip or mainboard, connect computer flash IOS firmware to test function then the whole process will be done successfullly!

Sponsor Ads

• Ad Space Available - Rent it Now!

Created on Sep 10th 2017 08:51. Viewed 1,053 times.

Comments