Metal Lock Repair by Ra Power Solutions all over the world

We are experts in cast iron repairs due to various reasons or accidents, cracks are developed in cast iron components. In some cases, the cast iron components get damaged into pieces. There is absolutely no need of rejecting the part or replacing it. Now, it is possible to undertake cast iron repair onsite by metal stitching and metal locking process. In fact, cast iron repair on site by metal stitching and metal locking process is the only option to repair cracks in cast iron components and salvage the component which is otherwise rejected due to the crack or serious damage into multiple pieces.

Cracks in Cast Iron were in past Repaired by an old traditional process of welding which is no longer practiced in the industry as the results after repairing by welding process are not always successful.

RA Power Solutions undertakes onsite cast iron repairs, repair of aluminium and cast steel casting.

All the repairs are undertaken by a cold process. The main advantages are as following:

Benefits of cast iron repair, aluminium casting and steel casting repair by metal lock and metal stitching:-

1. Cast iron repair and damage casting repair is possible on site and there is no requirement of dis assembly of damage component from the main equipment and send it to the designated workshop.
2. The metal stitching and metal locking process followed by RA Power Solutions for repair of crack in casting of grey iron, steel casting or aluminium is a cold process and no heat is generated.
3. Since the cast iron repair by metal stitching and metal locking is a cold process, there is no loss of alignment or change in the original profile of the component.
4. In most of the cases, there is no need of machining after the damage or crack casting is repaired. This is of great benefit in comparison to the welding process followed by few companies for crack repair.
5. The cast iron crack repair by metal stitching and metal locking process restores to its original strength of the casting and is watertight and gas tight repair.

The cast iron crack repairs are executed in minimum time reducing drastically the downtime of the equipment and the plant in totality.

1. The applications  for repair of crack in casting of grey iron, steel casting or aluminium few of which are mentioned below:-
2. Repair of crack engine block, inspection window, liner sitting area in entablature etc.
3. Repair of damaged cylinder liners, pistons, cylinder heads and turbine casing.
4. Repair of damaged heavy industrial machinery.
5. Repair of damaged gear box, pump casings manufactured of Aluminium, cast steel and grey cast iron.
6. We can broadly say that all types of cracks in cast iron, aluminium casting and steel casting can be successfully repaired.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Jan 28th 2022 03:43. Viewed 232 times.

Share on APSense

Comments