Articles

Browse Articles  »  Automotive  »  Metal lock crack repair process in Gurgaon

Metal lock crack repair process in Gurgaon

by RAPower Solutions RA Power
We specialise in cast iron repairs. Cast-iron components develop cracks for a variety of reasons or incidents. The cast iron components can be broken into pieces in some situations. There is no need to reject or replace the part. Metal stitching and metal locking processes can now be used to repair cast iron on-site. In fact, on-site cast iron repair using metal stitching and metal lock is the only way to mend cracks in cast iron components and save a component that would otherwise be rejected owing to the crack or severe damage into many parts.
Cracks in cast iron were formerly repaired using an outdated traditional welding procedure that is no longer used in the industry since the outcomes of welding are not always satisfactory.
RA Power Solutions undertakes onsite cast iron repairs, repair of aluminium and cast steel casting.

All the repairs are undertaken by a cold process. The main advantages are as follows:-
Benefits of cast iron repair, aluminium casting and steel casting repair by metal lock and metal stitching of crankcase:-

  • Cast iron repair and damage casting repair is possible on site and there is no requirement of disassembly of the damaged component from the main equipment and sending it to the designated workshop.
  • The metal stitching and metal locking process followed by RA Power Solutions for the repair of a crack in the casting of grey iron, steel casting or aluminium is a cold process and no heat is generated.
  • There is no loss of alignment or modification in the original profile of the component because the cast iron repair by metal stitching and metal locking is a cold process.
  • After the damage or crack casting is rectified, most of the time no machining is required. In comparison to the welding procedure used by a few companies for crack repair, this is a significant advantage.
  • The cast iron crack repair by metal stitching and metal locking process restores to its original strength of the casting and is watertight and gas-tight repair.
  • The cast iron crack repairs are executed in minimum time reducing drastically the downtime of the equipment and the plant in totality.

The applications for repair of a crack in the casting of grey iron, steel casting or aluminium few which are mentioned below:-

  • Repair of the crack engine block, inspection window, liner sitting area in entablature etc.
  • Repair of damaged cylinder liners, pistons, cylinder heads and turbine casing.
  • Repair of damaged heavy industrial machinery.
  • Repair of the damaged gearbox, pump casings manufactured of Aluminium, cast steel and grey cast iron.


We can broadly say that all types of cracks in cast iron, aluminium casting and steel casting can be successfully repaired.

For More Information Contact us: +91 9582647131, +91-124–4378292, and Email Id: rajshahani@rapowersolutions.com


Sponsor Ads


About RAPower Solutions Innovator   RA Power

19 connections, 0 recommendations, 71 honor points.
Joined APSense since, June 10th, 2021, From Gurgaon, India.

Created on Nov 3rd 2021 00:21. Viewed 284 times.

Comments

No comment, be the first to comment.
Please sign in before you comment.