Learn Exactly How Bagru Dabu Print Saree is Preparedby Aarav Fabricator Women Clothing Manufacturer
Today, every girl dreams of having, at least one designer, Saree. Designer Sarees manufacturers are looking at the growing love of the world's oldest surviving clothing. By seeing the reaction of the market, designers are also trying to use the painting and embroidery design and the use of conventional colors for suppliers and wholesalers. Today Bagru Dabu Print Saree is also in trend among all women.
Now let’s talk about what is Dabu Print?
Dabu is a stucco stamped in Rajasthan, India. In the production of printed fabrics, designers need for a lot of manual guide and hard work. This unique form is that printing is hygienic because this print does not use toxic or harmful synthetic dyes.
Let's take a look on how Bagru Dabu Print Saree is prepared
Bagru printing is one of the best traditional techniques of printing in natural colors, followed by Chippas in remote areas of Rajasthan. The process begins by making the finished printing fabric from the fabric by its own method. So if you are interested in Bagru Printed Saree, then you should know how it is prepared. So let's have a look how.
Process of Making Dabu:
The mixture of beedan and ground is washed with dirt to make a sticky paste. Special resist paste technology is commonly referred to as "dhabu". Dhabu as a resist to prevent staining during dyeing in the "dhabu" coverage area. This technique is only used to create indigo patterns. As the resist paste, "dhabu" thick and sticky, it can’t be achieved a more precise definition, apply to the wood on the fabric, the wood sprinkled on top, sawdust as a binder to prevent the color of the penetration of dyeing. The area where the mixture of clay and sawdust is present does not absorb the dye and remains colorless.
After printing, the fabric is dried outside the sun and then immersed in an indigo tank. Small printing table - "patias" for dhabu printing, printer application dhabu sitting on the floor. It is mainly done by women and old printers, they can’t stand for a long time. The art of making 'dhabu' paste is confidential and the recipe applies only to her daughter's law. Each family is having its own recipe to make a better paste according to their choice.
Post mordanting with Alum and Washing :
Mordanting with Alum : Locally known as "Fitkari Rangar". The dyes extracted from turmeric and pomegranate are very escaping, and for rapid production, late blends are carried out with alum (fitkari). In this process, the fabric is immersed in a large copper container filled with water and diluted alum. After leaving for a few minutes, it was taken out. Gently squeeze and dry on the ground. When it is completely dry, fold and store for at least 3 to 4 days in the dark so that the yellow dye is cured and finally it goes for washing.
Washing Process : The washing of the fabric is intended to remove the resist paste from the surface and the excess or non-attached dye. In this process, the fabric remains in the large tank for at least 3 to 4 hours until the resist paste becomes smooth. The fabric was then beaten on a flattened stone to remove the resist paste and became smooth. The fabric is then beaten on a flattened stone to remove the resist paste and the excess dye. The beating of the cloth is usually done in the place where there is flow of water present. This process will give you the best result for Bagru Dabu Print Saree.
Dabu printing cloth is also a unique art that is found with bagru printing. In this, a design of outline is done to the background of cloth. This sketch design is covered with plaster, dust is sprinkled. When the clay is dry, the sawdust sticks to the cloth. Thereafter, the entire fabric is dyed with the selected color. The presence of the clay and sawdust mixture does not absorb the dye and remains colorless. After dyeing and drying, wash the cloth to remove the clay and the mixture. For additional colors, the cloth is again dyed in lighter tones to cover the covered area.Source : Click Here
Created on Sep 25th 2017 04:21. Viewed 230 times.