Know How to Test Your Alarm System? A Brief Discourse

by Eva Spenser Innovation

There is nothing painful than having a security system with no proper feature to alert you in the event of intrusion. The security systems are complex in nature, and despite that, they have to be reliable enough. However, they are prone to malfunction, if not maintained properly.

So, time to time, It is important to test your security system and ensure that the home is well-protected and the security system is in working condition. And, when it comes to doing that, know a few things as mentioned below-

Why Should You Test Your Security Alarm:

There are a number of reasons why you should test your security alarm often. The first and foremost thing you have to do is- find wether your alarm security system is sensing unusual activities. Since your alarm system is rarely accessed, you may not come to know if there is something wrong happened. Hence, testing your home alarm system in Melbourne is necessary. Here are more such reasons that tell why you need to keep checking the security system often-

A sudden power loss can damage the electronics.
Some devices may get disconnected due to loose wires.

Ideally, you should test the security system at least once a month. At least, it must be done whenever you experience power interruption or fluctuation. Soon after such inconveniences, find if the devices are still functioning.

How to Test Your Security Alarm?

The easiest way to test your security alarm is to go through the control panel. This is where you can perform a system test to detect the devices that are working or those which are not working. However, if your security system doesn’t support the system test, sensors need to be tested individually for which you must call the alarm systems installers in Melbourne who have previously done the installation work in your premises. Apart from close and professional inspection, here are a few things you can do-

Door and Window Sensor Testing: To test the door and window sensors, all you have to do is close and open the door or windows randomly and find if the device is making a sound or not. If not, then you have to call an expert to look after this matter.

Motion Sensors Testing: Motion sensors detect moving objects by their heat waves. To test the motion sensors, you simply have to walk over the area covered by the sound alarms. Make sure there is no obstruction in front of the motion sensor. However, here is one thing you have to remember that some security devices detect infrared energy from 15 feet and some others detect it from 20 feet. Hence, it is important to know the capabilities according to the distance they are covering.

Glass Breaker Detectors Testing: It is quite tricky to test the glass breaker, and to do this, hold a set of keys and clap your hands in front of detectors. Glass breaker sensors listen to loud thud accompanied by the shattering noise- both of these are an indication of forced entry to the premises. You can even play a video clip of glass shattering to the test the sensitivity of the sensor.

If you find testing your security system is quite challenging, you can call technicians to inspect your security system and address them immediately.