Know About the Causes of Damage in Tyres

When you buy new tyres, they perform excellently for a couple of years because of their fresh structure. After five or six years, you feel your tyres are not able to sustain the level of performance. Your feeling is not wrong since your tyres are ageing. Your tyres are facing several factors that are responsible for the bad condition of your tyres.

According to experts, you can lower the rate of wear and tear by ensuring proper maintenance. But to face the enemies, you need to recognize them before the battle. If you do not know who your enemies are, they will beat you at any time. In the context of your Continental Tyres Wychnor, your enemies are those factors who kill your tyres gradually. You cannot maintain your tyres if you do not know these tyre damaging factors.

l We have listed common factors that kill your tyres.

l Have a look and maintain your tyres effectively.

Inappropriate Tyres

It is the most common reason for quick tyre wear. Generally, car drivers avoid compatibility factors while buying new tyres. Read your user manual to enhance your knowledge about the proper size, speed rating, and load index of your tyres. The easiest way to choose your new tyres is to look at your old tyres. Follow the pattern, and you will make a good decision.

Moreover, buy your new tyres according to weather and road conditions. Nowadays, high-grade seasonal and terrain tyres are available in the market. You can choose appropriate seasonal or terrain tyres according to your needs. If you do consider your requirements, you will face quick damage to your tyres.

For example, winter tyres for the summer season are not recommended and vice versa.

Heat

Heat degrades the rubber material of your tyres. You will experience more problems due to heat in the summer months. You must have observed the incidents of blowouts in the hot weather. Blowouts take place due to several reasons and overheating is one of them.

Moreover, heat increases the air pressure in your tyres when the air molecules move at an increased rate because of hot rubber material and road surface.

Friction

Friction takes place when your tyres run on even or uneven roads. The level of friction depends on the road material and irregularities on the roads. Friction is needed to maintain speed but it promotes the rate of tread wear as well. You can reduce the bad effects of friction by driving your car according to the road conditions.

Over-inflation and Under-inflation

If you drive your car with over-inflated tyres, they will wear out from the central area. Over-inflation in tyres is responsible for driving difficulty and compromised road safety as well.

Under-inflation of tyres is responsible for blowouts. Moreover, your under-inflated tyres will wear out from both sides.

Improper inflation is dangerous in wet conditions because of the risk of hydroplaning. Thus, you should maintain proper air pressure in your tyres according to the user guide.

Punctures

Tyres can withstand the debris that is present on the road. However, several sharp materials on the roads can pierce the body of your tyres. These objects include nails, screws, and pieces of glass.

Driving at High Speeds

Your tyres come with a speed limit and you should respect this limit. Driving at high speed without considering road conditions is enough to damage your tyres quickly. Heat, friction and high speed create a damaging combination to kill your tyres. Thus, you should slow down your speed to reduce the bad effects. High-speed driving is more dangerous if your tyres are overinflated or you drive on uneven road surfaces.

Treadwear

Your tyres come with proper tread depth that decreases over time due to factors, such as heat, friction, road conditions, and bad wheel alignment. Improper inflation level also promotes quick wear and tear.

Change your tyres if the tread depth reaches 1.6mm. This is the legal limit of tread depth in the UK. You should not drive on bald tyres because of the risk of poor grip, reduced braking distance, and improper control over the vehicle.

Poor wheel alignment

If you observe the signs of wear and tear on your tyres, it is possible your tyres are not properly aligned. Alignment may be disturbed due to bumpy roads and usually, the car driver is not aware of the damage. Thus, you must visit your garage regularly to check wheel alignment.

Ageing Tyres

Your Tyres Wychnor shows ageing signs like cracks and cuts on the sidewall. Cracks on the sidewall are a clear indication that oils and chemicals used in making the tyre have worn out due to UV rays.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Mar 7th 2022 03:50. Viewed 210 times.

Share on APSense

Comments