Is Your Floor Losing Its Shine? What You Really Need Is Professional Floor Sanding And Polishing

by Agradesanding Polishing A Grade Sanding & Polishing

Epoxy Flake Flooring Brisbane is an excellent option for concrete floors as it starts to wear out. On the other hand, for timber flooring, this is the best service in Floor Polishing BrisbaneYou can sand and polish any kind of timber floor. A large variety of timbers are used as flooring in various parts of the world. Some of them need to be handled a bit differently than others. For this reason alone, it is very important that you seek professional help with your floor sanding and polishing.

Preparation for Floor Sanding

The floor folks who come to take care of the floor sanding job will need access to lighting and electricity in order to begin and complete the polished timber floors. Homes that are newly purchased usually need to get their electricity reconnected prior to the commencement of refinishing of wooden floors. Using a professional floor polisher will make sure that you do not end up with a damaged floor.

It is best to have completed all painting before Floor Polishing Brisbane enters the premises. This does not apply to the final coat that is applied on the skirting boards because the equipment used for floor sanding is going to make contact with the skirting boards in the process of sanding and polishing.

All Gas and Electrical appliances will need to be turned off or disconnected during this process.

Floor Polishing Brisbane recommends that you cover or move all items that are stored beneath the wooden floors that are being polished. This needs to be done because sometimes timber floor finishes can seep through the floor.

All furniture and floor coverings will need to be moved out of the area that requires sanding.

The Process of Floor Sanding and Polishing

The sanding process for the floor always tends to begin with a bang. All the nails in the boards will have to be punched down so they go below the surface of the floor. In case the timber flooring has a pre-existing coating, it will be removed using a thicker grit of sandpaper. After the initial sanding has been done, the holes that have been punched will be completely filled with a matching colour of floor filler. Any repairs that the timber floor needs including any floorboard replacements will be done at this time.

When the sanding process has been completed, it is time for the first layer of coating of timber floor finisher to be applied to the floor. The floor is then left overnight to dry off. The floor then gets sanded fine using a special machine for buffing. This is done before any additional coats of polish are applied to the floor. It typically takes 3 layers of floor finishing coats to finish the floor polishing job. The entire process of floor sanding and finishing typically takes anywhere between three and four days to be completed.

The customers then work with the floor polisher to go through a selection of gloss, popular, mat and satin timber floor finishes.

Sponsor Ads

About Agradesanding Polishing Junior   A Grade Sanding & Polishing

1 connections, 0 recommendations, 11 honor points.
Joined APSense since, February 21st, 2019, From Brisbane, Australia.

Created on May 20th 2019 23:32. Viewed 475 times.


No comment, be the first to comment.
Please sign in before you comment.