How To Troubleshoot Epson Printer Setup Failed

During the printer installation, many users see the 'Epson printer WiFi setup failed', which pop up on the screen. The error message that appears on the screen indicates that your printer Wi-Fi setup has failed due to some technical trouble. Fortunately, a user can easily deal with problems with simple fixtures. If your printer is also showing you the message 'Epson Printer WiFi setup' on screen, you can proceed with the instructions mentioned in the guide and fix your problem. Therefore, if you do not want to go back to your old-wide connection, read and follow the instructions.

Common reason behind Epson Printer WiFi setup failed:

1. The WiFi connection dropped.

2. Network settings conflict.

3. Inscribed ssid or password.

4. security issues.

5. Firmware problem.

Epson printer wireless setup failed quick suggestions to solve the problem:

1. Check and make sure you have your printing device within a distance of 8 to 10 meters from your wireless access point.

2. Verify SSID (network name) and password. There may be a typing error due to which your printer is not connecting to Wi-Fi.

3. Reboot your printer and router. After that, wait for at least 2 minutes and then, proceed with the setup process.

Advanced troubleshooting tips to fix the problem

1. Return wireless service

If your EPSON printer is not displaying the network SSID at the time of setup, it means that the EPSON printer may not be connected to Wifi. If you want to fix the problem, then follow the Epson troubleshooting stages given below to fix the problem:

1. Turn off WiFi on your printer and then wait for at least 6 seconds. Turn on it again.

2. Next, you need to keep the printer close to your router and move forward with the process.

3. Make sure you have not disabled wireless broadcasts from wireless routers.

2. Check the safety password

Many times, when entering the password, people usually make mistakes that causes printer Wi-Fi setup problems. Usually, people make big letters and space mistakes.

It is important for you to ensure that you enter the password in the same format as provided, otherwise, you will not be able to connect the printer to the Wi-Fi network.

3. Reset Network Settings

Follow the steps below to reset network settings:

1. Turn on your appson printer, and wait until your device is ready.

2. Now, click on the user 'left/right' arrow, and 'OK' button to move forward with the setup.

3. Open the 'default restoration settings' using keys and hit the OK button.

4. Choose 'Reset Network Settings' option and then OK button.

5. You will see the confirmation window visible on your screen and click on the 'Yes' button.

6. Your printer settings will be reset.

4. Reset the WiFi router

There is a possibility that your WiFi router is working well due to which you are facing appson printers, it cannot be connected to WiFi problem. If you want to solve the problem, you can reset the router, and fix the problem. So, reset the router and fix your problem.

We hope that following these simple steps can help you fix the Epson wireless printer setup. Therefore, follow the steps carefully and solve the problem. However, if you still have doubts or have any technical trouble in interrupting your experience, contact the Epson Printer Support specialist. Pros can give you the best advice and make sure that nothing can compromise with your printing experience. Therefore, continue to print the documents in a wireless manner after solving the problem and is the best printing experience with the epson.

Also read:

• HP Deskjet Plus 4155 Troubleshooting Guide

• Samsung phones under Rs 50000