How to Set Up Wake-On-LAN on Windows 10

by Olivia Jones office.com/setup

Wake-On-LAN is a practical approach to access your PC remotely. It can be turned On anytime as the system always stays under Low power mode. However, there is no separate key or button to activate this feature, but you can turn on by abiding appropriate instructions.

Wake-on-LAN is the type of Network Standard that provides more compatibility and smoothness to your complex tasks. It enables the PC to switch On remotely. This function is available for a long time.

Pursue these indications to enable Wake-on-LAN Feature on Windows 10:

Activating Wake-on-LAN Feature on PC

If you wish to activate this feature, then you have to search for the Network Card first. If you don’t know where and how to find it, then follow these steps:

Firstly, you have to navigate towards “System Navigation” tab and then tap on it.
After that, hit the option “Components.”
Now, tap on the “Network” option there.
Finally, press the tab “Adapter.”

Once you get the Network adapter tab, then it’s time to activate “Wake-on-LAN” on your device.

First of all, tap the “Window” logo and “X” keys simultaneously.
Then, hit the option “Device Manager.”
After that, navigate to the bottom of the list by scrolling the page down.
Now, tap on the “Network Adapters” section and then launch the menu tab.
Go to the Network card and apply right-click on it.
Then, hit the option “Properties.”
After a while, properties windows will show up on your screen. Then press the “Advanced” section.
After that, search for the option “Wake-on-LAN” by scrolling the list down.
Then, modify value entries to “Enabled.”
Next, tap on the section “Power Management” and look for various options containing mark boxes. Then mark the box related to the option allow the device and also mark for magic packet related option. This action will wake your device.
Finally, tap on “OK.”

Note: The name of the Wake-on-LAN differs based on the device model. In case you are unable to get the Wake-on-LAN, then try to locate the Power on by LAN, resume on LAN, remote wake-up, Wake on the magic packet, etc.

Searching for Wake-on-LAN Under BIOS

When you are searching Wake-on-LAN under BIOS, then the menu might differ based on your device model. You have to use a specific tab while booting your device. Be it Escape, F1, or Delete key.
You have to search for the Power button under BIOS. Then look for your Wake-on-LAN from the provided listing.
Then, turn the feature ON and after that, save the modifications that you have made.

Let the Wake-on-LAN Feature to Work

For letting your Wake-on-LAN work on your device, your system should meet these conditions:

First of all, your system must have connected with the power source.
Second, the motherboard of your device supports ATX properly. Sometimes, in older versions of devices, it doesn’t work.
Third, your LAN card supports Wake-on- LAN and make sure that it is under active mode.
The most exciting thing about “Wake-on-LAN” is that it is universal and can be used from any location. It uses Magic Packets to work.

When the network card identifies the particular packet, it automatically allows your device to switch On. In this case, it becomes mandatory for your system to connect with a power source for smooth functioning.

It is applied even when it’s in off mode. Your network card makes small modifications every time once they are searching for a magic packet.

Source: https://digitalmcafee.com/blog/how-to-set-up-wake-on-lan-on-windows-10/