How to Program 2016 Ford Mondeo ID49 Key with Lonsdor

Here’s the procedure to duplicate a key for the 2016 Ford Mondeo with key chip ID49 Hitag 3 (Hitag pro). The remote control is automatically programmed. Key programming is done with the Lonsdor K518ISE key programmer.

Two keys are required. Original key and a new key (3-button remote).

Turn on ignition switch with original key

Select Immobilizer->Ford->New Mondeo-> pre-2017->Immobilizer->Add key

You can check Lonsdor K518 manual to add key or program all keys lost

Switch ignition off

Read VIN and key numbers

Insert a new key and turn on ignition

Programming in procedure

Identify number of programmed keys: 3

Program complete.

Test the remote control and start car.

Done.

Report this Page