How to Manual Setup for Canon Printer Pixma Mg2920?
by Alex Smith Printer Support ServicesWireless printing is a
very convenient option to get your work done. Canon printers are one of the
most trusted brand names for printers. They come with a wide range of settings
options and features for smooth working and printing the document or material directly
from your computer or mobile phones. In an office setup or any organization,
where there is a use of multiple devices. Connecting wires and cables to
different devices whenever you want to use them becomes a hassle. Wireless
connections make your devices and hence your work a lot more organized. So,
here is a guide on how to manual setup for Canon printer Pixma.In order
to connect your printer to any other device, it is necessary that your printer
is connected to your Wi-Fi. Let’s take a look at the steps for the same.
Steps to setup Canon Pixma
printer:
·
The set up might seem confusing at first, but the procedure
is quite easy to follow and not that complicated as it may sound. Most of the
routers have a WPS push button. It is there to sync a wireless printer. To
connect the wireless printer using the WPS button, perform the following steps.
·
Press and hold the Wi-Fi button on the router for a few
seconds.
·
Now, press the Start button and then the Wi-Fi button again.
·
You should see that the on button is now lit up.
·
Press down the WPS button.
Turn on the printer and
press the setup button. You will see the option of Wi-Fi setup in the menu.
Click on that. Keep clicking on the arrow beside Wi-Fi setup menu. You will see
the option of manual setup. Press ok. You will see a list of Wi-Fi networks
available. Select the name of your network. Click ok. Now, you would require to
enter your password. A connection should establish and then click on ok to
complete the process.
Another basic requirement
if you use a printer is to know how to replace ink cartridges. You should
receive an alert text when the ink cartridges are empty. You should also keep a
check on printer ink icon. Here’s How to change ink cartridge Canon Pixma
MG2920. Follow the steps mentioned below.
Steps to replace ink
cartridges:
·
Switch on your printer and lift the top cover of the printer
to expose ink cartridges.
·
The cartridges will automatically move to the centre.
·
Gently push the tab on the front cartridge and lift it up to
remove the old ink cartridge.
·
The cartridge will pop out and you can carefully remove it.
·
Take out the new cartridge from its packet. Make sure you do
not touch the ink with your bare hands.
·
Slide the new cartridge in the empty slot.
·
The colors on the marker of the print head should match the
ink cartridge.
·
You will hear them click when all the ink cartridges would be
in place.
·
Close the printer lid carefully.
After completing the
process, you should always make a test print to see if the printer has accepted
the new ink and there is no error in printing.
Sponsor Ads
Created on Jul 18th 2022 07:14. Viewed 207 times.