How do you fix Netgear router orange light problem?

by Bradford wilson How To Fix Belkin Router Not Working Problem

Are you currently dealing with the internet issues on the netgear router? these kinds of problem might be happening because of the internet or modem connection or there is some technical faults in the router settings.

Well, whatever it is, you can easily fix such kind of issues, all you have to do is follow the steps given into this article.

Reboot the router- Whenever your router isn’t working, you should start with restarting the modem, probably, there is something wrong with the internet settings, that’s why your router is unable to access the internet.

Check the wiring- this is another common reason for netgear router blinking orange light problem. People are unable to access the internet on their router due to the wiring issue.

Their router is not setup correctly with the router, due to which, netgear router can’t sync with the modem. So, you should check wiring connection, if your modem is unable to identify the connection, you may reset up it.

Check the modem- Let’s assure that your modem is able to access the internet from your provider. you can connect your DSL modem directly to the pc and then try to surf the internet. let’s see if it is allowing you to access the internet or not? If it isn’t allowing you to access the internet, you should communicate with your isp to resolve such error.

Check the firmware issues- Have you checked the firmware settings? May be your router is requiring firmware upgrade that’s why it isn’t functioning, so you should upgrade the firmware and then reload the browser again.

Change isp settings- you should also check the isp settings, may be your router is not configured with the correct settings, that’s why it is not serving the internet. so you should change the isp settings, and then reconnect your device to the internet.

After doing this, if your router is still not functioning, you may hard reset the router and configure the router settings again.