How Can You Reset the Waste Ink Counter in Epson Printers?

In order to reset the waste ink counter in your Epson Printer, you should be careful of all its parts. For a better guide, read the write-up. 

You must have often encountered your Epson printers stopping the needed printing because of the ink's waste pads being full. It is one of the common errors whose only solution in this matter is resetting the Ink's Waste Pad Counter. Now the best way you can achieve this is first you have to download a suitable Software Reset Utility, which on its launching will immediately reset the counter and allow your printer to perform, as it should. 

How Does the Error in the Waste Pad Occur?

Every inkjet printer uses a waste pad situated underneath the printer printhead. Basically, the waste pad is a large spongy foam located inside the plastic container and it functions to absorb all the wasted ink that gets pumped through the Epson printer. 

When the print head cleaning cycle goes on, then a large amount of Epson Ink is pumped through the printhead and made to deposit directly on the waste pad. It is an automatic cleaning cycle occurring whenever the printer is turned ON. Its very purpose is keeping the microscopic holes in the printhead totally clear of its dried ink. 

The Epson printers make use of piezo print head likely to clog easily if the cleaning is not done enough. Many Epson printer owners are aware of this massive of Ink Epson as used by this process. The printer basically enters the highest resolution Photo Print Mode and then it squirts a certain load of Ink Epson right out of the printhead and disposes on the waste pad situated below. 

We shall end the discussion by throwing some light on the solution for resetting the ink's waste pad. The very first matter you have to know is when the Epson printer is indicating the waste pad has become full, when normally they just only half full and still some space remains. Thus, the ink waste pad itself does not need to be replaced. In reality, the printers do not contain a sensor, but its calculations are usually based on the total pages being printed. Everything is done with perfection within the printer software - software utility is known to play its part here.  

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Jul 25th 2022 02:59. Viewed 203 times.

Share on APSense

Comments