Guide to Fix Window 10 Not Connecting to WiFi Automatically
by Hayate Abul Digital MarketingWindows 10
users across the world have some or the other time has faced a problem of
Windows 10 computer not connecting to the saved WiFi networks automatically.
Some of them have also said that their PC only connects to WiFi networks they
already remember. It may be because of a sudden malfunction or due to a system
upgradation that causes the computer to start switching the WiFi adapter off,
and then it requires bringing it in proper functioning following every shutdown
or restart, to save power. The issue generates a lot of frustration, and the
feature does not work as it should work. The problem may also be due to LAN
switched in, so if it is there just switched in, then remove it and restart to
test and it may work for your system.
The same issue can occur with drivers. In case it does not work then, below
we have some steps to fix a Windows 10 computer that fails to connect to Wifi
automatically:
Fix Corrupt System Files
First,
download and run Reimage Plus to scan and fix corrupt or missing files from
here, if files are corrupt and missing fix them and check if the system connect
to the WiFi automatically.
Forget the
Wifi network and then reconnect it
If a sudden
malfunction or bug is not allowing your system to save WiFi network
automatically, then follow the below:
Press on the
WiFi icon in the taskbar
Press on
Network Settings
Select
Manage Wi-Fi Setting below the Wireless Network Connection section. Then, press
the name of your wireless network and select Forget from below the Manage Known
Networks.
Reboot your
system. Press on the Wifi icon in the taskbar and press on your WiFi network
from the menu of the access network.
Always make
sure to check the Connect automatically. Press on Connect.
Type the
security code for the network. When the computer is connected to the network,
its memory should be refreshed and it will connect to the network
automatically, whenever the system shutdowns and restarts.
Stop WiFi Adapter From Turning Off to
Save Power
If your
system is not connecting automatically to WiFi networks it remembers afterupgradation
of Window 10 try the below guide:
On the Start
tab right press, and press on the Device manager in the visible list.
Twice press
on the Network adapters section to enlarge it.
See which of
the adapters in the menu your system’s WiFi adapter is,
then right click on its name. From the right press list, press on Properties.
When the dialog is visible to you, press on
the Power management button to visit it. Uncheck allow the computer to switch off
this device to save power. Press on OK.
When the
change is done and saved, your system should start connecting automatically to
WiFi networks, and it should able to remember the password as soon as it is restart
/shutdown or after a sleep mode.
Mathew Anderson is a Microsoft Office expert and has been working in the
technical industry since 2002. As a technical expert, Mathew has written
technical blogs, manuals, white papers, and reviews for many websites such as office.com/setup.
Source : Window
10
Sponsor Ads
Created on Jan 11th 2019 12:10. Viewed 311 times.