Good methods to remove adhesive residue.

Posted by Ruby Dai
4
Aug 1, 2015
261 Views
Image

Car owners all faced this problem before. After removing small car decoration, certificate of car components and other 

stickers, there will be residue left in the car or on car outer surface. You can not peel it off or scrape with hard object. 

What to do?


Learned by doing, the following two methods are found good: remove with Alcohol. Use a soft cloth dipped in sufficient 

amount of 95% alcohol, then gently wipe stickers. The stickers will easily soften out, while alcohol generally will not damage 

plastic parts or the paint car surface. But sometimes you’ll find alcohol is ineffective to some stickers. Then you can use a 

soft cloth dipped in a little gasoline and wipe stickers. Attention, because gasoline can dissolve some plastics or oil paint, 

so you should care when use this method and the cleaning time must be short. I have tried to wipe the car surface with 

gasoline in a short time and there was no obvious influence to car surface paint. In this case, the stickers can be easily removed. 

 

Is there a method to remove the adhesive residue on the door?

Some decorations are attached to the door with strong adhesive tape. Later removed, there is a lot of residue left on the 

door. You can use gasoline or kerosene to erase the residue. Or you can buy No. 1200 water sand paper, spray water and 

wiped stains, and then buy a can of clear varnish, dilute with banana oil to brush the door to make it bright againDo not 

use nail polish remover to wipe the door. It can remove the residue, but will also damage the door surface.

 

Method to remove the residue of protective film.

Scrap the protective film with small blade and then wipe with benzine. If the residue is on frosted glass, then need to wipe 

with oil of turpentine.

Nowadays, self-adhesive protective film without adhesive/glue has be invented. No need to worry about residue any more.

 

Method to remove stickers trademark

labels are on most new stainless steel pots or glassware. After removal of the label, the residue of adhesive is very difficult 

to remove. Wiping with a damp cloth or small knife tends to leave residue. Through repeated practice, I summed up some 

tips to share with you.

For adhesive marks on a hard surface, we can coat oil-free nail polish removing liquid on the surface, then gently wipe with 

a soft cloth . Industrial alcohol or gasoline can also be used to clean the residue. If the adhesive gets on your skin, you can 

use lemon juice to clear.

In addition, the hand cream can also be used to remove adhesive residue. Hand cream contains a lot of water (generally 

over 70%). The water contains a certain amount of surface active agent. The surface active agent has good capacity of 

wetting, penetration and solubility. It can quickly penetrate into between the adhesive and the surface, so achieve the 

purpose of removal. You can also find a number of similar products, such as facial cream, cleanser, detergent, which have 

the same effect.

Comments
avatar
Please sign in to add comment.