EPA Standards Marine Gas Tanks Made of Aluminum Sheet

by Brandon Hefner Custom Marine Fuel Tanks

Boats for cruising purposes require large-capacity fuel systems. EPA standards marine gas tanks are commonly made of one of the three materials – aluminum, composite or steel. Adequate maintenance is required for these tanks to reap the service for decades. On the other hand, generator tanks are also made of similar materials with comparatively thick walls. Generators generally have three types of tanks – sub-base, underground, and above ground. The sub-base tanks are smaller than any other types of tanks and used widely in industrial and manufacturing sites.

Composite fuel tanks that are made of fiberglass or plastic need little or no attention. However, owners have to take good care of their aluminum or steel tanks are more prone to leaks and damages. So if you have a leaking tank, it should be immediately repaired or replaced with a new one. The process of replacing the tank is lengthier which includes removing and cutting parts of the old tank, fabricating, welding, and installing the replacements.

Protection

The American Boat and Yacht Council (ABYC) recommends that the aluminum EPA standards marine gas tanks must consist of alloys grade 5086, 5083 or 5052. There are other specifications regarding the thickness of large, medium, and small fuel tanks which you can check on its website. Aluminum fuel tanks are mostly found in cruising boats and they break because of some common reasons that include: poor fabrication, contact with copper, frequent exposure to seawater or condensation, and internal contamination. If you find fabrication faults, you may contact professional tank builders for better solutions.

Corrosion Resistance and Durability

Aluminum generator tanks and boat tanks are highly corrosion-resistant. They offer durability, strength, and weight reduction. Aluminum is a lightweight material with higher malleability. Building tanks with this material is very common because of its benefits. You’ll see most of the water boats in the US have these kinds of tanks. Although they are always in the marine environment, boat owners have to keep them free of damp spots and objects. Properly installed generator tanks help in running the generator for years to come. Tanks are subject to rusting and clogging over time if not preserved well.

Professional Tank Fabricators

If you are looking for high-quality and customized EPA standards marine gas tanks, it’s recommended that you should talk to professional fabricators. They will explain to you how they can help with great fuel systems, as well as how you can draw the prototype of your customized fuel tank. They work according to your requirements and deliver your product on time.