Demolition Hammer: The Big Guide!

Layout and function

A demolition hammer consists of a chisel at the tip of the hammer hammer, a hammer and the housing. Unlike the function of a hammer drill or ordinary drilling machines, the chisel does not rotate but impacts the elements to be removed with great force. This is extremely powerful. Therefore, this device is irreplaceable on the construction. In order not to use a hammer and chisel to remove the tiles in your bathroom, the purchase of a demolition hammer can be worthwhile. The devices normally run with power, since the most power can be provided here. If the device were operated with battery, it would not provide the required power.

The striking hammer of the demolition hammer transmits the energy to the chisel. The chisel is then pushed from the bush to the material to be machined, and breaks out individual parts at each stroke. Each demolition hammer is also equipped with a vibration damping. This facilitates the work and ensures long-term durability. The most important features of a chisel hammer are the beat frequency and the impact force. These characteristics determine the work and the degree of hardness the unit can perform. The impact force of a stemmed hammer is indicated in joules as well as in softairs. This unit therefore indicates which force is necessary to raise by one meter by 100g. For lighter units, a slightly lower impact force is normally used, but at the same time with a higher beat frequency. In the case of long-term work, for example, a uniformly worn mass of material is ensured. The lower power of joule is therefore balanced with the frequency. But also a stemmhammer with power and frequency is nothing without a powerful chisel.

The chisel

First of all, one differentiates between different types of chisels. These have different purposes and represent a high degree of flexibility in this regard. A pointed bit has the same as the name already has a tip at the front of the chisel. This is used for cutting and crushing bricks or large walls. Flat chisels, have a flat tip and are used for removing plaster or tiles. Here one can remove the flat material very well the materials to be removed. Rivets are used to separate rivets, screws and nails. Sheet metal chisels are used to separate sheet metal parts forcefully. These are used, for example, in car body construction and in the automotive industry.

If you want to have a long time with your chisel, you should pay attention to buying a chisel whose quality is very high. With cheap and not very high-quality chisels it happens that these wear very quickly or even break off. Since the investment in a demolition hammer but is worthwhile, one should pay special attention here. High-quality chisels can be re-sharpened and very easy to make again ready for use. In addition one should be careful, that the chisels also fit into the associated devices. Different manufacturers and models ensure that there are differences and not every chisel fits into every device. Here one should also risk an eye more than to end up with a chisel that does not fit into the device. More on: https://stemmhammer.org/