Characteristics of chalk stone crusher
Chalk stone as a case:
Chalk stone is a good calcium carbonate deposits, calcite, white or gray, a variation of hardness of 3, 2.715 g / cc, opaque, chalky minerals chalk used to make other products, but also for other purposes a very broad scale. Preparation and handling indivisible chalk crushing equipment and milling equipment, so chalk and chalk stone crusher sand making machine is the use of two of its production facilities, the following describes the chalk and chalk crusher sand.
Hammer crusher for crushing all kinds of hard and abrasive weak materials. The compressive strength of the material does not exceed 100MPa, moisture content less than 15%. Material to be broken coal, salt, chalk, gypsum, brick, limestone. Hammer crusher for further crushing fibrous structure, stone production line flexibility and toughness stronger broken wood, paper or broken asbestos cement waste to recover asbestos fibers and so on. In addition, hammer crusher not only can be used for crushing production line , can also replace cone crusher in beneficiation production line. The main components of hammer crusher rotor with a hammer (also known as hammer) of. Rotor from the spindle, disk, pin and hammer components. The motor drives the rotor rotating at high speed in the crushing cavity. Material from the upper mouth to feed into the machine, hit, impact, shear, abrasive and high-speed movement of the hammer and crushed. In the lower part of the rotor, with sieve, sieve size less than the pulverized material size fractions discharged through the sieve, sieve size larger than coarse sieve retention continue to be on strike and grinding hammer, and finally through the sieve from the plane.
More details:
Advertise on APSense
This advertising space is available.
Post Your Ad Here
Post Your Ad Here
Comments