Causes and solutions of BMW 7 Series burning oil
BMW 7 Series for the purchase of large displacement supercharged engine, but in the northern city of owners, we all know that dry weather in northern cities, the air of some dust mixed with air filter for these alone is not enough, and those not completely filtered fine dust into the inside of the engine after the formation of sludge mixed with oil, sludge friction due course of time the engine cylinder is scuffed resulting in burning oil problems, at the same time in all regions of oil mixed, long-term speeding and other bad driving habits are the root cause of burning oil problem.
In order to avoid the burning oil of this problem is not in the appearance or alleviating effectively, first proposed in the maintenance of a date or a few kilometers in advance for maintenance and 20000 km to replace the air filter depending on the region ahead of replacement. Because the present each city and each area of oil are uneven add BMW special specified fuel additives in petrol, the vehicle to control the speed don't see car super speed, super speed and avoid sharp acceleration.
Everyone has a heart, if the heart stops beating and the life will disappear.Cars are no exception,airbag code reader is the heart of the car,therefore, quality is good and bad, directly affects the car's performance and service life.
AK500Pro Description:
AK500Pro is the most advanced Benz programmer in the world now. AK500Pro internal Benz original factory calculator, no need remove ESL ESM ECU, with EIS data directly calculate out original factory key data.AK500Pro is the only machine in the world that has KEY-LESS go writing function.
AK500Pro Feature:
1. Faster and safer to write MCU.
2. Internal Benz original factory key generator.
3. Support NEC fast renew, Motorola MCU safe read and write.
4. Support infrared read and write NEC key and Motorola MCU key.
5. Support Benz read and write "Key-less go" Key.(Only this machine support)
6. Support through OBD port active Key-less function.
7. Key test function: more easier to test key and EIS(ESL).
8. Support ESL fast unlock, no need 32G database.
9. Support through OBD read and write SBC data, easier for change SBC control unit.
Does AK500PRO support Mercedes Benz W204 after 2008?
Answer: so far AK500PRO doesn't support NEC eeprom key programming, but support AK500pro NEC eeprom key calculation.
W204 is with NEC eeprom, therefore AK500pro neither supports W204 nor supports the following Mercedes Benz models: w204/w207/w221/w218 and W164 after 2008 year which EIS model CPU is NEC.
In order to avoid the burning oil of this problem is not in the appearance or alleviating effectively, first proposed in the maintenance of a date or a few kilometers in advance for maintenance and 20000 km to replace the air filter depending on the region ahead of replacement. Because the present each city and each area of oil are uneven add BMW special specified fuel additives in petrol, the vehicle to control the speed don't see car super speed, super speed and avoid sharp acceleration.
Everyone has a heart, if the heart stops beating and the life will disappear.Cars are no exception,airbag code reader is the heart of the car,therefore, quality is good and bad, directly affects the car's performance and service life.
AK500Pro Description:
AK500Pro is the most advanced Benz programmer in the world now. AK500Pro internal Benz original factory calculator, no need remove ESL ESM ECU, with EIS data directly calculate out original factory key data.AK500Pro is the only machine in the world that has KEY-LESS go writing function.
AK500Pro Feature:
1. Faster and safer to write MCU.
2. Internal Benz original factory key generator.
3. Support NEC fast renew, Motorola MCU safe read and write.
4. Support infrared read and write NEC key and Motorola MCU key.
5. Support Benz read and write "Key-less go" Key.(Only this machine support)
6. Support through OBD port active Key-less function.
7. Key test function: more easier to test key and EIS(ESL).
8. Support ESL fast unlock, no need 32G database.
9. Support through OBD read and write SBC data, easier for change SBC control unit.
Does AK500PRO support Mercedes Benz W204 after 2008?
Answer: so far AK500PRO doesn't support NEC eeprom key programming, but support AK500pro NEC eeprom key calculation.
W204 is with NEC eeprom, therefore AK500pro neither supports W204 nor supports the following Mercedes Benz models: w204/w207/w221/w218 and W164 after 2008 year which EIS model CPU is NEC.
Advertise on APSense
This advertising space is available.
Post Your Ad Here
Post Your Ad Here
Comments