Best 3G Multifunctional Vehicle GPS Tracker 2019｜Concox GV20

by Concox Garin Marketing Manager

What Makes Concox GV20 3G GPS Tracker Stand Out?

3G High-speed Transmission Data

Concox GV20 supports WCDMA 3G high-speed data transmission, which can reach 7.2 M/s, the 3G high-speed data transfer rate is nearly 43 times the speed of the 2G network, let you get rid of the 2G worries, enjoy a quick and exciting life.

GPS +AGPS+LBS Tracking

The GV20 supports GPS, AGPS and LBS triple positioning, once there has a good GPS signal, it will locate via GPS, if it doesn’t have GPS signal, it will locate via LBS. The triple positioning allows the location to be pinpointed accurately and rapidly.

Oil Cut-off

When the phone receives an abnormal alarm, you can send an oil cut-off command on our tracksolid platform to make sure the security of the vehicle. The tracker can only indicate to cut off oil when GPS is invalid position status, and the speed is less than 20km/h

Wire Cut-off Alarm

When the electricity supply of the device is cut off, it will activate the cut-off alarm, the built-in lithium battery equipment continue to work. And the related SMS will be sent to the pre-set SOS numbers. Let the thief nowhere to hide.

9 — 90V Voltage Range

Wide operating voltage applied to all types of vehicles

Professional Tracking Software - Tracksolid( www.tracksolid.com)

Every day, some 6 million devices are tracked with JIMI’s Tracksolid platform, our own back-end software solution that has, to date, seen more than 12 million total connected devices. We are very proud of this number and equally passionate about increasing our presence in the IoT field.

How to set the GPS tracker to activate on our Tracksolid platform?

1. Buy a 3G or 2G SIM card with enough data and credit.

2. Input the SIM card into our gps tracker, then install the device to the car or truck, drive the car to the open area.

3. Download the APP "Tracksolid" bound the tracker's IMEI to the APP, then check the position.

4. If shows device not activates, please use your cellphone to send SMS with "STATUS# and "PARAM" and "GPRSSET#" forward this 3 reply to us for checking.

5. Normally for can not track device most reason comes from the SIM card issue or did not set the correct APN. (Our device had collected most APN, but some APN did not store, so need you set by hand with the command of "APN, APN name#"

6. If you still have any questions, welcome to contact us freely firstly, thanks!

For more product information: www.iconcox.com