A Complete Guide On How To Choose A Fountain Pump

by Tyler P. A Passionate Blogger - Entertainment

Choosing the right pump for your pond is an important decision, this is why you need to consider a lot of factors before making a final decision. If you fail to keep the water moving, it can result in stagnation, and water stagnation is a root cause for problems like mosquitos, algae, foul odor, and more.

In this article, we will discuss how to choose the best pumps for fountains online

Types of Pond Water Pumps

There are two main types of pumps available in the market,

1. Submersible Pond Pumps: This pump is designed to fully submerge into the deepest part of the water. They are placed directly below the pond vault. A submersible pump can range from 50 gallons to 5000 gallons per hour. They are easy to install and provide the best solution for small ponds. You can also use it to dry out the pond. If you have created an aquatic ecosystem in your pond, then look for a model that does not use oil.

2. Centrifugal Pond Pumps: This pump provides an energy-efficient solution. They are installed in a dry area near the pond. This pump is suitable for larger ponds. Compared to submersible pumps, they are highly complicated to install and creates a lot of noise. However, this pump is easy to maintain and it is also safe for aquatic animals.

When you Order Pond Fountains pumps, keep in mind that different pumps come with different cord lengths. Make sure the cord of the pump is long enough to reach the socket that is far away from the pond. Some cords specify that the socket should be at least 6 feet away from the water.

How to check the Size of a Fountain or Pond Pump?

The size of the pump is measured by gallons per hour at one-foot height. Bigger pumps come with high horsepower. To determine the size of the pump, you need to calculate the volume of the water by multiplying LxWxD by 7.5.

Water Circulation

Pond water should be circulated at least once per hour. For example, if you have a 1000 gallon pond, the pump should be able to run 1000 gallons per hour. If you are using a pressurized filter, you need to turn the water once every 2 hours.

Uses of a fountain or pond pump

The main use of fountain pumps is to improve the display of your pond. But these pumps can serve other purposes as well. The pump motion helps in starting water aeration. It is a simple process that increases the level of oxygen in the water. A high level of oxygen in water prevents the formation of anaerobic bacteria, which is necessary for fish.

The pump also keeps the water in motion, which prevents stagnation. Water stagnation leads to many problems like foul odor, algae formation and it can become a home to many disease-causing insects. Plus, it also deteriorates the display of your pond. Imagine, sitting near a pond that is covered with algae and has mosquitoes all over the pond.

If you fail to maintain your pond water, it can become a breeding ground of mosquitos that can cause diseases like malaria and dengue. This can severely affect the health of you and your family.

Algae buildup is another main issue in ponds. Algae prevent sunlight to reach the bottom of the pond, which results in the death of fishes and plants. When you install a pump, the circulation of water eliminated the algae, allowing sunlight to reach the bottom of the pond.