A Basic Guide To Cable Jointing Kits

Posted by Yamuna Infrastructure
2
Sep 24, 2021
369 Views
It goes without saying that the cables and wires you see everywhere are a crucial part of this world and humanity. Whether it’s a four-wheeler or an electronic appliance, everything that runs on electricity or has electrical components installed inside will need cables to work. Also, every cable has to connect with another cable to ensure a smooth flow of electricity from the initiation point to the endpoint. It’s where Cable Jointing Kits come into play. Terminations play a significant role in establishing the physical connection of cable ends to the terminals of equipment pieces or another wire. In doing so, it facilitates the flow of electricity in the desired way.

1. Multiple types: Cable jointing products and systems can be of multiple types, even if they serve the same purpose. The differences ensure that they can perform various functions and operate at low, medium, or high voltages. Installers use these when working on transformer terminals, substation switchgear, air-insulated cable boxes, and electric poles. Depending on the type of application, it’s possible to break them down into pre-molded, cold shrink, push-on, and heat shrink variants.

2. Heat shrink terminations: Heat shrink terminations are probably the most commonly used ones. As you can probably guess from the name, these tubes shrink and encase a cable joint when subjected to heat treatment using an electric or gas-based gun. Heat shrink products are perfect for using XPLE cables in both outdoor and indoor applications. They can even stand up to hazardous atmospheric conditions.

3. Cold shrink terminations: These terminations follow the exact opposite installation procedure. You’ll need them when you have to work with cables in an environment where you can’t rely on naked flames or any source of heat. That’s why they’re best for establishments where flammable gases or elements exist. Technicians simply need to remote the supporting cord during installation that causes the tube to shrink and fit into the desired location. You can purchase cold shrink products from almost all Cable Joints Manufacturers.

4. A few considerations: When it comes to purchasing termination kits, there are a few things you need to consider.

  • The design of the kit has to comply with international quality standards.
  • The product you purchase should pass through rigorous durability, reliability, and safety-related tests.
  • The termination kit has to be easy to install because installers won’t be able to spend too much time, especially when they have to work in hazardous environments.
  • The terminations have to function smoothly and ensure the cables work smoothly too, whether installed underground or above-ground.

Final words

Only the best and most reliable manufacturers of cable joints use different kinds of accessories and systems to craft their products. Some of those accessories include heat-shrinkable busbar sealing tapes, scotch tapes, resin cable caps, etc. If the joints become loose, electricity will leak and eventually lead to accidents, including power outages, short circuits, or fire outbreaks. As you can guess, your best bet is a reliable, recognized, and experienced manufacturer of termination kits.
Comments
avatar
Please sign in to add comment.