Articles

Browse Articles » Automotive » 2022 March sale for Top Quality MB SD connect...

2022 March sale for Top Quality MB SD connect C5 DOIP 2021/12 Xentry SSD with T440P I5 laptop

by Xing T. ***

Top Quanlity MB star SD CONNECT C5 SD C5 full set + SSD Xentry 12/2020

plus Leno v o T440P 4gb i5 processor laptop ready to work

all already for use

MB SD Connect Compact 5 support reading out & erasing trouble code, reading the real-time data of sensor and actuator, coding and programming. MB SD Connect Compact support K line, CAN BUS and UDS protocol,

The price including for MB STAR SD C5 Xentry C5 full kit ,including the latest xentrt 12/2021 SSD software and Len o v o T440P

Package Included:
1pc x SD C5 Multiplexer
1pc x OBDII 16PIN Cable
1pc x 38PIN Cable
1pc x 14PIN Cable
1pc x 8PIN Cable
1pc x Lan Cable
SSD xentry 12/2020 version hdd
1pc* Leno v o T440p (used with good condtion)

it works with all benz vehicles till to 2020 year

MB SD Connect C5:

New MB Compact 5 Features

New MB SD Connect Compact 5 Star Diagnosis support DTS and vediamo offline program;

2. New MB SD Connect Compact 5 Star Diagnosis not only support K line diagnose and CAN BUS,but also UDS diagnose protocol.

3. Multiplexer now use Lan cable to connect

4. Connector adopt Military quick swap technology, it can support 10,000 times pull plug, more stable;

5. All core accosseries adopt original new packing chip, and 24hours test, guarantee the quality of the products;

Super Engineering Edition Description:

Super Engineering Edition is used by engineers to develop diagnostic software used in engineering software,Xentry and DAS is based on the Mercedes-Benz Super ENGINEERING developed and delivered them to the general sale dealers use.

Therefore, the use of the Mercedes-Benz Super Engineering Edition are open in all diagnostic / Coding Coding / modification / programming on and there is no restriction.

it is not necessarily be able to freely increase through VEDOC (with the original application code modification process) or reduce the SA code to modify vehicles equipped purposes, such as: increasing the SA500 electric folding mirrors.

Xentry and DAS development model known as: pioneering Data Engineering edition in 2010 after the release, adding a number of functional limitations. Therefore, we can not be encountered in the use of any special modified version is latest vehicle can not enter the control unit, or enter the control unit. For example: W204 / 212,2012 years meter need to modify the configuration language, or other resources to open convenience features. Diagnosis Benz super ENGINEERING version function Coding / modification / programming database is to use Xentry database, so Mercedes-Benz Super Engineering Edition version with Xentry on the version, as long as the database is able to use the new models in the new . V4.00 version can not support the use of COMPACT3 & SDconnect ODX files. The latest V5.00.05 use SDconnect support ODX files. Recommends using SDconnect faster relatively stable.

SA freedom to increase or decrease the code, to modify the vehicle is equipped with the purpose to increase the SA500 electric folding mirrors, Mercedes-Benz diesel AdBlue urea system limits permanently from extinction! And so many features

With this software, you no longer need to apply online online programming or change SA. Now you can use the car Vediamo any offline programming, design code, change the SA Code and other functions.

What can the Mercedes-Benz engineers version do?

A brush hidden. For example, depending on the line DVD unlock more. Provided that the hardware support.

2, NTG4.5 free demolition finished, urea reset.

3, off-line programming: Mercedes system to do your programming code must account login TIPS, Mercedes engineers super version of the system can be individually programmed to bypass offline SCN, located yards. Without online account, the equivalent of a separate system.

4, you can not through VEDOC (with the original application code modification process) will be able to increase or decrease the SA code freely, to modify vehicles equipped purposes.

5.To cancel a series of functions, such as, ECO start-stop function

6.Replace the COMAND calculate scrap pieces password

7.engineer version for vehicle detection and fault diagnosis

Super Engineer BENZ Vediamo 05.00.05 Software description

we installed the latest Mercedes-Benz Super Engineer Software+xentry+das+eps+wis softwares in one hard drive .

with this you can do diagnostic / Coding / modification / programming

MB star SD CONNECT C5

Benz compact 5 is a latest Benz wireless multiplexer. It will connect to the PC by wireless connection.

The system offers total diagnostic coverage of all engine, chassis and body systems:

Reading and re-setting of diagnostic trouble codes (DTC)

Real-time reading of dynamic data

Full component activation clearing and re-setting of adaptation values

Coding of all engine, chassis, body and instrumentation modules

Key configuration

Procedure for fitting Mercedes- Benz accessories through the D2B ring and MOST bus

Total ASSYST / ASSYST + control (Active Service System) to update on board service history

DAS: Concise interface and straightforward operation using a wintel computer you can realize a quick and accurate code reading and testing on the cars system.

Features:

Engines (All Gasoline & Diesel Systems)

Transmissions and Electronic Selector Modules

Airmatic and Active Body Control Suspension Systems

Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems

Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s

Drive Authorisation System

Sam (Signal Acquisition) Modules

Electronic Ignition System (EIS)

Pneumatic System Equipment and ATA functions

Air Conditioning / climate control Systems

Instrument Cluster

Tyre Pressure Control

Parktronic System

Keyless Go

D2b Command & Audio Gateway (D2B and MOST networks)

TV Tuner

Headlamp Range Adjustment

Seat Electronics

Rvc, RST & Vario Roof modules

Automatic Clutch System ACS

M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)

Features:

Support offline function ;
2. Support K line diagnose, CAN BUS and UDS diagnose protocol. ( The old MB STAR C4 can not support UDS diagnose protocol for its main board doesn't have UDS chip );
3. Multiplexer now use Lan cable to connect;
4. Connector adopt Military quick swap technology, can support 10,000 times pull plug, more stable;
5. All core accosseries adopt original new packing chip, and 24 hours test, guarantee the quality of the products;
6. Supported language: English, Portuguese, Spainish, German, French, Italian, Finland, Denmark, Sweden.

HDD with Xentry the latest version software (DAS+Xentry+EPC+WIS+StarFinder+SDMedia)

Software details:

1) 23MultiLanguages:English,Chinese,Czech,Danish,German,Greek,Spainsh,Finnish,

French,Hungarian,Italian,Japanese,Korean,Dutch, Polish,Portuguese,Romanian,Russian,Serbo,Slovak,Slovenian,Swedish, Turkish

2) Latest version for DAS XENTRY / WIS / EPC

Xentry for new released 204/207/212/221 and Smart Model for 454 452 451 450, Support Benz cars, trucks, Sprinters, smart, etc
3) New car of B 246, CLS 218, SLK172, etc, released in this version
4) The car PL66 is added to Benz price list
5) Developer model Function: Mercedes-Benz engineer mode, remove limitations and open more functions.
6) Xentry Stop Software for quick close xentry
7) HHTwin stop software for quick close HHT
8) Support the software to be quickly Recovery
9) Support Online technical service

1) DAS: the automatically Diagnosis Assistance System
2) Xentry: New software released by Benz Company after 04/2009 by diagnosis
new cars.
3) WIS.net: Workshop Information System
4) EPC.net: Electronic Parts Catalog
5) ST Finder: Part location finder
6) STARUTILITIES : the movement management system and self-test
7) SD Media : Video and PDF lessons

8) PL 68: Price List to find out how much price by input the parts
number
9) Smart TAN Code: Opened special function in DAS program with Smart cars
450/451/452/454
10) Developer model: Mercedes-Benz engineer mode, remove limitations and
open more functions.
11) Benz Disassembly system: Video lessons to teach you how to remove each
12) part from Benz cars with details order steps.
13) Software language: Multi-languages 22 Languages

https://www.ebay.com/itm/124833973031