123.hp.com/envy5542 Setup | HP Envy 5542 Printer Setup Manualby Anderson S. Printer Technology Experts
123.hp.com/setup 5542 User Manual :
The HP Envy 5542 is one multi function printer that can scan, print, copy, fax. The monthly duty cycle can be 1000 pages and consists of features like scan to email, scan to folder, HP Auto wireless connect. The recommended monthly volume is 300 to 400 pages.
The mobile printing solutions can be Apple AirPrint, HP ePrint, Morpia Print Service, wireless direct printing. The compatible operating systems can be Windows and Mac. The maximum print speed can be 21 ppm.
Setting Up My HP Envy 5542 Printer :
The following guidelines can help you to install the HP Envy 5542 printer:
First of all, peel the tape stuck to the 123.hp.com/setup 5542 printer using a scissor or knife.
After that, flip back its folds and take out the printer by holding the styrofoams at its side.
Now, make sure that you must clear off all the packaging materials inside and outside the HP printer and send them to recycling.
Also, remove the small cardboard boxes inside the printer that was kept for safety.
Then, you must remove the styrofoams from its sides and remove the over protective cover on the scanner glass of the
Moreover, you have to check for the essentials contents in the package.
Now, proceed with 123.hp.com/envy5542 setup.
Further, place the HP Printer on a flat surface and begin with turning on the printer
Secondly, attach one end of the power cord to the back of the HP printer.
And fix other end of the power cord to the electrical outlet
Push the power button on the front panel to turn on the printer
Thirdly, as per the printer instructions, you have to load the ink cartridges and insert the paper
How can I load install ink cartridges and insert paper?
First of all, unpack the new ink cartridges that came along the printer package
After that, access the ink cartridge door.
Squeeze the ink cartridge lever to place the cartridges.
Secondly, place the cartridges smoothly, one by one, into the respective slots.
At last, press down the lever to lock the cartridges and confirm the locking with the clicking sound.
Now, pull out the input tray of the HP Envy printer.
Fan a pile of paper to its limit and keep it on the input tray.
Ensure to adjust the width guides of the tray and also extend the output tray.
On the other hand, the HP Envy printer will recognize all these
And this will start with aligning the ink cartridges.
Further, it prints the alignment page.
You must verify the alignment page for correctness.
The first stage of 123.hp.com/envy5542 is complete.
At last, the 123.hp.com/setup 5542 is all set and ready to print.
Created on Jun 17th 2020 09:45. Viewed 524 times.