Use of plastic shredder

by allen guo Food Processing Machinery

Plastic pulverizer is a professional machine. In using plastic pulverizer, you need to understand some precautions of using plastic pulverizer in order to use plastic pulverizer correctly.

Recommended Features

Use of plastic shredder
1. Trial operation of plastic crusher
1. Switch on the power grid;
2. Press the jog button to test run the machine;
3. Starting and idling for 1-2 weeks;

Learn more about Use of plastic shredder»

Review on Use of plastic shredder

4. Combined operation of reprinter and crusher;

5. Check that there is no abnormality and send a start signal.

6. During operation, the machinery and motor should be free of vibration, sound and humidity should be normal, the temperature of each bearing should not exceed 75 C, and the temperature of the motor should not exceed the nameplate.

7. The chain tension of the loader must be the same. Under full load, the chain tension must not exceed the length of two chain links, and there must be no jamming or chain skipping.

8. After the fusible plug or explosive chip of the transferer joint is damaged, it cannot be replaced with wood or other materials.

9. The safety device of the protection net of the shredder should be kept intact, and it should be checked frequently during the work. If it is damaged, it should be stopped immediately.

10. The safety devices such as the tail protection of the reprinter must be intact.

11. Transfer the loader.

(1) Clean up the floating coal and floating stern of the tail, both sides of the fuselage and under the bridge;

(2) Protect cables, water pipes, oil pipes, and hang them neatly;

(3) Check the roadway support and transfer the loader while ensuring safety;

(4) The walking trolley and the tail conveyor of the belt conveyor should have a good contact, do not deviate, and have a good overlap after relocation to prevent large pieces of plastic from smashing the tape and ensure the smooth flow of coal;

(5) After transferring the loader, the nose and tail of the machine must be kept flat, straight, stable, and the live bars of the jack should be retracted.

Second, the precautions for the operation of plastic crushers

1. The plastic crusher and power unit must be installed firmly. If the plastic crusher needs to be fixed for a long time, it should be fixed on the cement foundation; if the plastic crusher needs to be moved, the unit should be installed on the base made of angle iron, and the power machine (diesel engine or