transformer oil purifier

by Leo Luo Sales Manager

The insulating oil purifying system is meant for the regeneration of aged oil in transformers. The aged oil may contain moisture, dissolved gases or air, dust, carbon product due to arcing, rust from

Recommended Features

Particles including fibres, rust and colloidal carbon.
Free and dissolved water.
Gases produced by fluid ageing

Learn more about transformer oil purifier»

Review on transformer oil purifier

Application:
The DVTP series is specifically designed for filtering and dehydrating new or used insulating fluids such as switch oil, transformer oil, cable oil, etc. Also it is a good choice for vacuum filling oil into transformers and dry out internal coils & windings. The machine is suitable for industries where regular insulating oil treatment is required.

Feature:
Ideal for insulating oil conditioning and vacuum oil filling
For high voltage transformers above 110KV
Eight models available to accommodate various flow rates
Continuously removes moisture down to 3 PPM or less
Remove 99.5% particulates larger than 1 micron
Remove gas contents down to 0.1% by volumn
Powerful multiple vacuum stage design
Coalescence-separation technology
Duplex 3D evaporation technology
Double-infrared fluid level controller
A trinity of interlocked preventive device
Low-watt heating system
Mobile equipment for outdoor use
Explosion-proof type available
On-line vacuum oiling and dehydrating

Advantage:
Comparing with the single-stage vacuum type, DVTP series upgrade to double-stages vacuum system, which greatly raises the machine's working vacuum degree, so it can dewater, degas and remove particulate impurities much more efficiently. It allows the transformer to be in operation while impurities are effectively removed.