Window Shutters Repair Tips: Solution to Common Problems

Window shutters are a great way to prevent the sun from entering your home and overheating it. They also provide you with privacy so that no one can see inside of your house. But shutters do not last forever, and they will eventually break down over time if not taken care of properly. The shutters may get stuck shut or jammed shut, which is very frustrating when you need to get in or out of the house quickly. This blog post will outline different problems people come across with their shutters and how to fix them.

Shutters Won't Open

The shutters will not open if they are unlatched. The shutters have a latch at the top and bottom of them so that when you pull on the shutters, it releases the latches from their place. If this is happening to your shutters, then all you need to do is close the shutters again and check each latch to make sure it is shut securely. (Credit Information: D.P Interiors)

If the shutters are shut securely, and you are still having trouble opening them, then there is likely a problem with the gears of where they spread. The shutters have to be oiled regularly so that they do not break down over time. If your shutters were recently oiled or lubricated, then this can cause problems with the shutters opening. If this is happening to you, all you need to do is make sure that the shutters are completely shut and open them using your hands by pulling up on each side of the shutter door. If you find that one or both latches are not closed, then pull up on them to get them snapped into place again.

Shutters Opening Halfway

If your shutters only open halfway and will not go any further, then this usually means that something is stuck in between the shutters. If you find a piece of paper in between the shutters, then take it out from behind them, and they should open all the way again.

If something much more significant is stuck between your shutters, just shut the shutters halfway and call for help to get whatever is removed from inside of them. It is hazardous to try and pull off something yourself if you are not familiar with shutter installation.

Shutter Door is Stuck

If your shutter door is stuck shut or jammed shut, then this usually means that there is debris inside the shutters' gears. There may also be a crack in either side where the shutters open, causing them not to shut properly. To fix this problem, all you need to do is find the shutters latch and open it to lift both sides of the shutters on their hinges. Once they are at a ninety-degree angle from each other, go ahead and take out any debris inside of the shutters' gears as well as any shutters that are cracked. Please make sure you also check the shutters latch on both sides of the shutters to ensure they close properly as well.

Shutter Door is Moving Too Slow

If your shutter door is moving too slowly, then there may be something jammed inside of them, causing them not to move freely. If the shutters are jammed shut, then this can also cause them to move too slowly. To fix this problem, you want to make sure that both sides of the shutters are lifted on their hinges to open at a ninety-degree angle from each other. Once they are opened, just take out any debris inside of the gears as well as shutters that are cracked. You should also see if the shutter's latch is snapped into place securely on both sides of the shutter door before closing them again.

Shutter Door is Moving Too Fast

The shutters may be moving too fast because there may not be enough lubrication between their gears, or they could be too stiff. If this is happening to your shutters, you want to make sure that both sides are lifted on their hinges so they open at a ninety-degree angle from each other. Once they are opened, go ahead and take out any debris inside of the shutters' gears as well as shutters that may be cracked.

Overheating

If your shutters are overheating, then this means that their gears have become bent or warped over time and they need replacing. If you find that your shutters' gears are warped, you want to make sure that both shutters are shut all the way and then open them halfway. Once they are opened at a forty-five-degree angle from each other, just take out any debris inside of their gears as well as shutters that may be cracked. You should also see if the shutters latch is snapped shut on both shutters before closing them again.

Sticky or Jammed Shutters

If your shutters are sticky and seem to be getting stuck as you try to open and close them, this could only mean one thing: that they may need lubrication, or there could even be a crack in one of the shutters where it opens, which is causing them to stick shut. To fix this problem, you want to make sure that both shutters are closed all the way and then open them halfway. Once they are opened at a forty-five-degree angle from each other, go ahead and take out any debris inside of their gears as well as shutters that may be cracked. You should also see if the shutters latch is snapped shut on both shutters before closing them again.

Broken Shutters

Broken shutters can be a nuisance, but you don't need to buy all new shutters if your shutters are broken. Shutters companies in Maryland can fix them and save money.

To fix your shutters, you must remove them from their hinges with pliers or screwdrivers. Then you can clean the shutters and see how far broken they are. If your shutter is only chipped, then put a dab of wood glue on it to fix it. If your shutters are damaged beyond repair, they will not work correctly, and you need to replace them.

Code Clashing

If your shutters are not working correctly and their gears seem to be getting stuck, then this means that there may be a code clash with your shutters. To fix this problem, make sure both shutters are shut all the way and then open them halfway. Once they are opened at a forty-five-degree angle from each other, just take out any debris inside of their gears as well shutters that may be cracked. You should also see if the shutters latch is snapped shut on both shutters before closing them again.

Dents and Dings 

If your shutters have dents or are misshapen, this usually means that someone has hit the shutters or they have been exposed to extreme hot or cold temperatures. It can make them distorted over time, so you'll need shutters companies in Maryland to install shutters that are brand new.

Debris

If shutters are full of debris, they will not work correctly. To fix this problem, shut both shutters all the way and then open them halfway. Once they are opened at a forty-five-degree angle, please take a closer look and clean debris inside of their gears as well shutters that may be cracked.

Power Failure

If your shutters stop working during a power failure, the problem could be with the shutters' motor. If DIY methods don't solve the problem, you need to check with a professional electrician and rewire the internal setup.

Conclusion

In this blog post, we have gone over widespread problems that people come across with shutters. If your shutters are not opening or closing correctly, it is most likely because the cord is corroded or shutters themselves are not being hung correctly. Overheating can be solved by installing additional insulation behind shutters, and sticky shutters can get resolved by sanding shutters down. If shutters are broken, it is best to be replaced by a professional shutters installer who can install new shutters that will fit your windows properly. You can take a cue from the mentioned recommendations to address your shutter issues with appropriate remedies.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Oct 1st 2021 06:09. Viewed 359 times.

Share on APSense

Comments