Why are Brakes So Important for your Safety?
by Mill Tyres Cheap New Tyres Boston
Brakes
employ friction to negate the rotational momentum of the wheels and
help in deceleration. Pressing on the brake pedal pushes the brake
pads against the wheels. Generally, the front brakes play a greater
part in stopping the car than the rear ones because braking throws
the car weight on to the front wheels.
A
survey in 2016 showed that the 2nd highest reason for accidents in
the UK was defective brakes. Your brakes need to work perfectly to
save your life. That’s why you should get your car’s brake
systems inspected on a regular basis. Visit us at Boston to get a
brakes system test or for getting a brake repair in Boston.
Things
We Check During a Brake Inspection
-
Brake Power of the brake system.
-
Brake fluid.
-
Brake lining thickness.
-
Disc thickness.
-
Grinding or scrubbing noises.
A Brief Description of All of the Above Components
-
Brake Power:
The
magnitude of the force generated by the brakes of a vehicle is
braking power. The braking system needs to generate the same amount
of power to stop the car’s momentum.
-
Brake Fluid:
This
is a special kind of fluid that helps to transfer all the forces from
one component to other in a hydraulic brake system. Most brake fluids
are glycol-ether based. This fluid is non-compressible, with low
foaming tendency and low volatility. It should also have adequate
viscosity.
-
Brake Lining:
These
are one of the first components of the braking system which tends to
wear out. It constitutes of tough and heat resistant material with a
high coefficient of dynamic friction. The brake lining is responsible
for creating the friction necessary to stop the wheels; hence it must
be able to survive high temperatures. Fibres like synthetic aramids
make up these linings.
-
Brake Disk:
The
rotating part of the wheel’s disc brake assembly, against which the
brake pads press, is the brake disc. They are primarily made of grey
or cast iron. The discs may have holes or slots throughout its
surface, helping to dissipate heat better.
Knowing
about the different brake components that require frequent servicing
will help you to monitor the repairing process efficiently. You can
never go wrong with being vigilant.
Few
Things to Look for in a
Brake Repairing Service
-
Ask about what the servicing covers. Sometimes just replacing brake pads will be enough. Other times you will need help with other parts. Professional auto garages can help you with a full inspection of your Car Repair in Boston.
-
A good brake job will include flushing out old brake fluid, adding new, resurfacing rotors and tuning brake mechanisms.
-
Built up grit on the brake pistons will result in the pads not disengaging when you take your foot off the pedal.
-
Worn out callipers will require replacements.
-
Master cylinder and wheel cylinders, if beyond repairs, will need replacements.
Don’t take chances with brake performance of your car. If you think something is wrong with your brakes, visit renowned service stations like Mills Tyres for a Brake Repair Boston. You can even ask them to help you out with suspension repairs, wheel balancing and alignment as well as other services.
Sponsor Ads
Created on Nov 13th 2018 04:29. Viewed 391 times.