user manual of UUSP UPA USB Serial Programmer upa usb v1.2
by Betty Gao obd2motor UUSP UPA is obd2tuning auto ECU programmer.UPA USB Serial Programmer covers most commonly used devices.Newest upa usb v1.2 Hardware version is 2013.Below obd2tuning wil sharing How to use UUSP UPA USB Serial Programmer read car ecu?UUSP UPA USB Serial Programmer upa usb v1.2
language: English.
Version: HW:V2013;
SW:V1.2
The instruction of using UUSP UPA USB Serial Programmer read car ecu?
1.) you can download UPA USB software for free.
2.) Check the installation manual of UUSP UPA USB V1.2, according to the procedure,copy this file: "uuprog.lic" to C:Program FilesELRASoftUPA-USB SuiteDevice Programmer, crack V1.2.1.17 UUSP USB software.
3.) Plug the UUSP UPA USB V1.2 into the PC, and connect the UUSP UPA with your pc, then you will find new hardware, to use the driver file of UUSP UPA progammer, install the UUSP USB hardware drive.
4.) open the software of UPA-USB Device Programmer, and choose USB port, and the new UPA USB hardware will be found. Click -file-new-programmer, and then create the file of UUSP UPA USB programmer.
5.): Choose the programmer model in the menu, and check the connections of chip and programmer in the menu.
6.) Choose : "read" button, read the data from ecu tuning, "Verify" button, Verify the chip is valid? "program" button, write and program the chip. Click-file-save, finish one times demonstration of UUSP UPA USB
programmer.
Sponsor Ads
Created on Dec 31st 1969 18:00. Viewed 0 times.
Comments
No comment, be the first to comment.