Articles
Useful Tips for Installing Motocross Graphics Kits
by Fifty Seven Designs Design Your BikeThe easiest way to improve the looks of a dirt bike is installing some attractive and good looking Custom Motocross Graphics for the bike. These graphics are like stickers which enhance the way a bike looks.
It is the best way to improvise a simple looking bike for youngsters and any dirt bike enthusiast who loves riding the vehicle. A few things are important to keep in mind when it comes to installing the graphics on the bike to get a perfect finishing and satisfactory look for the bike.
Removing the Old Graphics
The first thing that is essential to consider is removing any old graphics stickers that may be stuck on the body of the bike. Completely removing the old sticker is crucial to ensure that the fresh sticker that is a person applies on the bike body gets properly applied and reaches proper finishing. This can be achieved by scrapping off the sticker and then washing the entire bike thoroughly to ensure that the surface is clean.
Properly Clean the Bike
It is important that there are no residues on the body of the bike before one applies fresh graphics from the Motocross Graphics Kits. People often forget that cleaning a bike before applying new stickers is essential to get rid of any dirt or dust on the surface.
This dust or dirt would lead to improper sticking of the graphics and hence a strong stick would not result. The graphics might start chipping off as a result of this inefficiency in installation.
Try Applying In Moderate Temperature
Another thing that one must keep in mind when applying the graphics from their custom motocross graphics kits is the temperature. It is always preferable to choose a shady place away from direct sun or heat when applying the graphics sticker. This helps make sure that the sticker gets applied effectively and does not chip off.
Intelligent Usage of the Wet Method
The people who have been using motocross graphics kits for a long time use the wet method. This method is a very effective way of obtaining a good finishing with the stickers. The method requires the person to prepare a 95% water and 5% soap solution for applying on the body of the bike.
This needs to be done before the sticker installation begins. This way the sticker can be readjusted after placing on the surface for better finishing.
Article Source:- https://sites.google.com/site/fiftysevendesigns/useful-tips-for-installing-motocross-graphics-kits
Sponsor Ads
About Fifty Seven Designs 
Design Your Bike
0 connections, 0 recommendations, 9 honor points.Joined APSense since, March 2nd, 2020, From Manchester Road, United Kingdom.
Created on Mar 3rd 2020 05:36. Viewed 263 times.
