Use Cases of Pressure Switch MCS 11 From EATON

by E Control Devices authorized electronic Component Distributor

Every application has certain requirements that cannot be met by any ordinary equipment. Industrial settings require a range of monitoring and controlling devices to ensure the process.

The pressure switch is one such device that can help in monitoring and controlling various demands of a machine that is constantly working under extreme conditions. The pressure switch MCS 11 is provided by Eaton. It is one of the most reliable devices that provide accurate results.

When Pressure Switches Are Required?

People want reliable pressure switches that can provide reliable and accurate readings and can be trusted over their performance. There can be several use cases for using pressure switch MCS 11 and some of these conditions are:

Stopping The Pumps and Motors

In some hydraulics applications, the pressure of the fluids reaches the lowest threshold value. The pressure switch MCS 11 sends a signal to the motor or the pump to stop the action. The stopping action at the right time prevents damage to the equipment.

Evaluate Clogging & Contamination

The threshold point is set at the value when the filter gets clogged or contaminated due to some reason. The replacement of the filter is also sensed by the switch and a signal is sent for the replacement.

Equipment Protection From Overload

In hydraulics, the lifting cylinder reaches the preset value of the threshold, at this time the switch gets activated and restricts the further extension of the cylinder.

Brake Line System

It is also used in certain cases where the emergency brake is needed to be applied. The pressure in any system is increased when the emergency brake is applied. The emergency brake triggers the switch. This pressure is measured by the switch and the brake is activated.

Conclusion

The pressure switches are also called pressure sensors and most people know them as the device that measures the pressure of gas and liquid.

The pressure switch MCS 11 detects any changes in the physical, electrical, and chemical properties of the process. The detected results are electrically produced according to the real-time fluctuations in the reading.