Troubleshooting steps to Fix Brother Printer Error E50
by Neymar Watson Technical SupporterBrother printers are widely used in multiple industries that include
commercial, educational, business or personal. Covering all these areas, Brother
Printers are being constantly modified for better and better performance. Multi-purpose
Brother Printers provides scanning and high-quality printing. However, the
printing resolution depends on the model of printer you use as different models
offers different functionalities.
Though these printers requires much less time to execute the
result, it sometime shows different errors. Any printing error that pops up on
the machine can be really frustrating. However, you can always get assisted by Brother Printer Help Support in any
case to pix problems related with printers. One of the frequently occurring
errors is ‘Printing Error E50’. There could be different reason behind the
cause of the error and before you seek out for help, check if the following is
true in your case. See what does the Error E 50 actually mean and what the
causes are.
What does Brother
Printer Error E50 means?
When you Brother Printer show up Error E50, it particularly means
that there is a fault caused by fuser unit and the temperature unevenness. This
error may result into printer’s poor functionality; also may stop responding or
printing. Generally, Error E50 occurs in Brother Laser printers depending upon
its usage. Because Brother laser printer comprises of several status lights, so
it becomes easier to detect the problem and to fix it. Brother printer's screen
panel may also display the message of “Fuser Unit Failure” or “Replace Fuser
Unit.” it is the same error as E50.
You can fix this issue either by getting assistance from Brother Printer Help Support or follow
these troubleshooting steps.
Step 1: Check for
the temperature of the printer and if it is heated up, press the power button
and turn off the machine for several minutes.
Step 2: Lose all
the wire linking and re-attach them firmly. Examine if the voltage supply is appropriate
and constant as recommended for the printer.
Step 3: Restart
the printer.
Step 4: Press “Go”
and “Set” buttons altogether when the power supply is on.
Step 5: If
required, hold on to the buttons (Go + Set) until the LED screen shows the
message of ‘Go Test Mode’ and the release.
Step 6: Now, press
on the ‘Go’ button and see if it starts normally. If the printer doesn’t start
working in its usual way, press the button several times and wait for the
machine to work.
If the printer still shows the
error, unplug and clean all the connections and check if there is any clogged
ink. If you find that the ink is cumbering anywhere inside the printer, clean
it properly. Or otherwise, immediately connect to Brother Printer Help Support and you can also dial on Brother Printer Help Number to get
assisted via call.
Sponsor Ads
Created on Jan 19th 2018 04:03. Viewed 669 times.