Top 5 Tips to use Diamond Profile Bullnose Wheel Effectively

by Neha Sharma Blogger

What is a Bullnose tile?

A Bullnose tile is a tile that has a non-sharp rounded edge. It is not an ordinary tile and is different from flat or straight tiles.

What’s the use of a Bullnose tile?

Bullnose tile is a specific type of tile mostly used in bathrooms. You see bullnose tiles everyday but you don’t notice them as you are not aware of it. A Bullnose tile is used in other areas of home as well such as kitchen countertops or other walls having tiles. Sometimes, you don’t have bullnose edges available in tiles, you can as well make your own easily.

How is a Bullnose tile used?

A Bullnose tile used to prevent sharp edges of a tile. For this, Diamond profile wheel used to give the desired shape of a bullnose edge. With the help of this wheel, one can create a bullnose edge profile with a professional finish and least effort. You can buy the tools needed to make a bullnose profile from “Amazon.com”. The product names and links are given below:

STADEA Diamond Profile Wheel / Profile Grinding Wheel Full Bullnose.
diamond profile wheel bullnose - Demi Half Bullnose B10.

Why a Bullnose tile is useful?

A Bullnose tile gives a more polished look to the tiles and it provides a smooth rounded edge to avoid sharp edges on kitchen countertops, bathrooms, building corners etc. It gives better look, and safer to use.

How a Bullnose tile is helpful to you?

A Bullnose tile prevents sharp edges of tiles when a project completes. It is helpful on walls, floors, corners and decorative trim. It is also needed while installing porcelain tiles and slate tiles.

5 TIPS TO USE DIAMOND PROFILE BULLNOSE WHEEL EFFECTIVELY

Use Right Tools - While shaping a Granite edge, connect the bullnose profile wheel to the low-speed grinder and polisher. Once it connects properly, start the grinder and polisher and keep the speed at low-level. As you feel more comfortable, you can increase the polisher RPM.
Never Use Profile Wheels at an Angle :Always hold the slab flat and don’t turn it at an angle because it will not give you the desired bullnose profile shape. Approach it horizontally.
Keep Moving the Profile Wheels :Running wheel at one place will grind the surface more than desired. Diamond wheels are pretty aggressive and cuts stone fast. Always keep moving it to and fro, check amount of cut and stop at desired cut is done.
If you are making a Bullnose edge of Porcelain Tile, press the porcelain tiles to your work table and put the diamond profile wheel on the grinder. By moving the grinder slowly up to the edge of the tile and applying pressure as needed as you continue rounding the edge of the tile, you will get the desired shape of a bullnose edge.
While installing stone or porcelain tile on the shower walls and a bullnose edge is not available, try to make it on your own. It is possible to grind down and finish one edge of a tile to create a bullnose by using a tile wet saw fitted with a bullnose blade. By using an angle grinder with a polishing pad, it will clear up the edge to match the finish on the rest of the tile.

In this way, you can easily have a bullnose profile on kitchen countertops, bathrooms or anywhere else if you use diamond profile wheel effectively.