This is a Nissan Note 2007 (automatic, right wheel, Intelligent Key).
There
is a working key, customer need to add chip key startup..So this post
show the guide on how to register chip key for Nissan Note 2007 by
.
(Note: The tutorial is translated from Russian, for educational purpose
only)
Diagnostic device
ABRITES Vehicle Diagnostic Interface ,
when selecting (Nissan Note 2006+) requires a 12-digit PIN code, which is
presumably considered for label located behind the glove compartment (glove
box).
But the car has a sticker, so the chip should be registered with
the device
SBB Key Programmer.
How to calculate PIN code for registration key / chip in the car?
PIN will be assumed by the label BCM, with the help of the program AD600 Code
Wizard Pro (Demo the Version) , which can be downloaded at this link. Or by hand-held
Nissan Pin code reader NSPC001.
To perform this procedure, you’ll need:
- Net HITAG 2 transponder – PCF7936.
- Wires (jumpers), for supplying power to the ignition contacts.
How to register the vehicle key / chip on Nissan Note using SBB Key
Programmer?
1. Insert the device connector
SBB v46.02 in OBDII
vehicle.
2. The instrument select
NISSAN JAPAN –
the MICRA
MARCH 00- –
Gasoline
3. T
hen Insert a key and turn on the console – Insert the
key into the lock, and turn the ignition switch on.
4. The instrument choose
NATS 5 –
the PROG. NEW
KEYS.
5.
Without the PIN CODE you CAN not program new keys –
Without a PIN, you can not program the new keys.
6. Enter the 4-digit PIN number, counted on the label BCM.
7.
– Insert the key to be programmed in sequence, one after the
other, on and off the ignition for 5 seconds. After the end of the programming
start the engine.
8. Once the button is pressed all quickly, without errors:
Created on Mar 19th 2018 20:28. Viewed 379 times.
