OBD2Tuning sharing how to diagnostic ford cars by ford vcm diagnostic tools?

by Betty Gao obd2motor

Ford IDS VCM scan tool is obd2 tuning super ford vcm ids diagnostic tool. Ford VCM IDS scanner can support Ford Mazda Jagua Land Rover. Ford vcm ids clone newest version is V75/ V80 and IDS Land Rover / Jaguar version is V128.

There are many things that can go wrong with your Ford engine. Many common problems also trigger a "check engine" light to come on. The check engine light can alert you of various problems with the engine's sensors. However, some problems can be diagnosed by the Super Ford VCM, without having to bother reading the trouble codes by the Ford VCM OBD Scan tool. While many ford vehicle diagnostic tools can be purchased from OBD2tuning obd scan tool online shopping, it's a good idea to figure out what's wrong with your engine first.

Ford VCM OBD ids is obd2tuning ford vcm obd diagnostic tool.Ford VCM OBD interface 2013 Latest version is Ford Focom 1.0.9418/9419 FORD-VCM OBD can support 1995-2012, some 2012 ford, mazda and other few brand cars(Jaguar) cars.

Here obd2tuning will sharing how to use ford vcm diagnostic tool.

Start the engine and open the hood. If there is any white steam coming out around the mating surfaces of the engine, there is a head gasket leak. The head gasket will need to be replaced. If there is black smoke coming out of the tailpipe, especially when you accelerate, then your engine's air-to-fuel ratio is off. You are burning too much fuel. This may also trigger a check engine light warning relating to the oxygen sensors on your Focus.

Locate the onboard diagnostic (OBD) access port to the left of the fuse panel in the driver's side footwell.

Plug the Ford VCM OBD scan tool into the access port. This is a 16-pin plug and can only be oriented one way.

Turn on the Ford VCM OBD scan tool and turn the ignition to the "On" position.

Press "Start" on the Ford VCM OBD scan tool. This will retrieve the engine codes. When the display reads "OK," unplug the scan tool and shut off the ignition. Use your Focus' service manual to translate the trouble codes (or see Resources).

More information,welcome to web: www.obd2tuning.com.