Men’s Wetsuits: All the Things a Beginner Should Know
by Vikram Kumar Digital marketing SEOBuying your first wetsuit can be pretty intimidating,
especially if you know nothing about men’s wetsuits. The market is full of
hundreds of options, and the shopping process could feel complicated to you
even if it’s not.
This guide will help you understand the basics of wetsuits so that choosing one
for yourself becomes easier.
Different Types of Wetsuits
Depending on the amount of body coverage you want, there are around five main
types of wetsuits to choose from:
· Full suit with full sleeve legs and arms
· Spring suit with short legs and full or half sleeves
· Long john with long legs and sleeveless arms (these are rare now)
· Short john with sleeveless arms and short legs
·
Vests and jackets for the upper body.
The type of men’s wetsuits you choose must depend on
the activities you intend to do while wearing them and the temperature of the
water. Also, the fit of the suit matters a lot. If it’s not a snug fit and is
too tight, you will find it hard to move around in the water. If it’s too
loose, water will get into the suit, and you won’t get any heat insulation.
Recommended Wetsuits for Different Temperatures
If you’re entering very cold waters where the temperature is below 52 degrees
F, you need to don a full suit around 7mm or 5/4mm in thickness. It is also
suggested that you put on a hood and gloves. For temperatures between 52-63
degrees F, you can use a 4/3 full suit with optional gloves and booties.
In slightly warmer waters, say 64-70 F, you could go for a 2mm wetsuit (long or
short). For temperatures over 72 F, a 2mm wetsuit or skin wetsuit would do. You
could even wear just single-piece Rip Curl Mens Jackets and Vests with trunks in
warmer waters.
But these temperature guidelines are not set in stone, and you must buy a
wetsuit that makes you feel comfortable. After all, everybody is built
differently.
Thickness and Seam Type
In case you don’t already know, wetsuits are mainly categorized by different
thicknesses. Wetsuits can be as thick as 8mm and as thin as 1-1.5mm, as seen in
some Rip Curl Mens Jackets and Vests.
Spring suits are often 2mm thick, while full suits are offered in varying
thicknesses that are different at the core compared to the arms and legs. Some
common combinations are 5/4mm, 4/3mm, and 3/2mm.
Like the thickness, the seam type of men’s wetsuits also plays a significant
role in keeping the body warm. There are three types of seams- blindstitch,
liquid-taped, and flatlock.
Flatlock seams are not ideal for cold waters as they are not water-tight. Such
seams are usually found in cheaper wetsuits. For good warmth, you should pick a
wetsuit that uses blindstitched or liquid-taped seams for a water-tight seal.
Other Factors
Apart from the thickness, material, seam, and size, the entry type of a wetsuit
also matters. It can make a lot of difference in terms of comfort while wearing
or removing the suit. Full suits and spring suits offer back zip entry as well
as front zip or zipperless entry.
For a more accessible entry, go for back zip suits since their opening is
larger. Front zips offer smaller openings and need more effort to get inside.
But obviously, front entry suits are more water-tight.
That’s all! Make sure you choose your wetsuit carefully to remain safe and
comfortable in the water.
Resource:
If you want to buy Men’s Wetsuits
at discounted rates, browse the options at the Hansensurf website. They
offer discounted rates on all types of wetsuits includint Rip Curl Mens Jackets
and Vests.
Sponsor Ads
Created on Jun 17th 2021 00:10. Viewed 84 times.