Know These Essential Infos for Proper Brake Repair & Maintenance

The temperature of your car’s brakes can rise as high as 700°C during operation. So, it needs no mentioning that the brakes sustain a high amount of mechanical stress. The part of the brake system that takes on most of this stress is the brake pads and shoes, which erode over time. But how long can your car’s brake pads last?

Well, there's no specific answer to that as experts all over the worlds agrees on a range of 30,000 to 70,000 miles. Furthermore, some factors can accelerate brake pad erosion.

Tips to extend the life of brakes

Let’s look at some ways you can ensure your car brakes lasts as long as possible.

• Avoid unnecessary emergency braking. Harsh and sudden braking takes a toll on the pads and causes them to erode faster than usual. Hence, drive with a sustainable speed that allows you to brake smoothly in traffic.

• Don’t load your car with extra weights as excess baggage in your car increases its momentum. As a result, it takes more braking power to bring the car to a stop, thereby inducing more erosion on the brake pads.

• Use only your right foot for barking. Doing this will ensure that you never apply the brakes and acceleration simultaneously, a practice that is detrimental for the brake pads. Since most people don't have similar control over their left and right limbs, it's a common occurrence to use the left foot along with the right involuntarily.

• Don’t tail-gate, as it necessitates sudden and hard braking. Maintain healthy distance from the car ahead of you, as it provides more room for smooth barking.

The above practices will keep the brake pads usable for their intended duration. However, many times issues with the brake components arise and fixing those are more complex than a brake pad replacement. So, how to know that a brake repair in Pickering is due?

Signs of a faulty brake system

• Hard brake pedal

A stuck brake pedal is a common problem that makes it extremely difficult to apply the brakes at a proper time. The most common cause for a hard brake pedal is a faulty brake booster or a loss in vacuum the brake booster provides. Additionally, blockages in the hydraulic line will obstruct the brake pedal.

• Seized calliper

A stuck calliper is another form of a brake defect. Brake callipers can get struck due to a faulty calliper piston, slides and rusted calliper bolts. A stuck calliper keeps the brake pads pressed against the disk/drum continually. Thus, it seems as if the brakes are on even when you haven’t applied them.

• Spongy brake pedals

A loose or a spongy brake pedal is a common defect that arises in the brake system. It’s caused due to the leaking hydraulic fluid from the brake lines. Also, a leaking master or a slave cylinder results in a loose brake pedal. Consequently, the brakes pads engage only partially.

Having a well-functioning brake system is necessary to pass an MOT in Pickering. Now, that you are aware of the common signs of a defective brake system, visit a professional car garage like ADD Tyres and Exhausts for brake repair.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Jan 10th 2019 01:41. Viewed 492 times.

Share on APSense

Comments