Setting up an HP printer with Wi-Fi usually involves a few steps. These instructions will guide you through the process for most HP printers, although some specific models may have slight variations.
Steps to set up an HP printer with Wi-Fi:
1. Prepare the Printer:
- Turn on the HP printer.
- Ensure it has paper and the ink or toner cartridges are installed.
2. On the Printer’s Control Panel:
- Navigate to the ‘Setup’ or ‘Network’ menu.
- Choose ‘Wireless’ or ‘Wi-Fi Setup Wizard.’ This might be under ‘Wireless Settings’ or a similar menu
- The printer will start searching for available networks.
- From the list of networks, select your Wi-Fi network.
- If prompted, enter the Wi-Fi password using the printer’s control panel.