Articles
how to use OBDSTAR H110 Program Key for VW Polo 2013 NEC 24C32
by Tacry J. Auto Diagnostic Tool Recently,OBDSTAR engineer share video guide on how to use OBDSTAR H100 program dealer key for VW Polo 2013 NEC 24C32.Here OBDSTAR share it for customers.OBDSTAR X300 PAD2
Procedures:
Connect OBDSTEAR H110 to vehicle by OBD port.
Power on the device.
Select “VEHICLE”
Select “IMMOBILISER”
Select”VW/AUDI/SKODA/SEAT”
Select “VW/ADUI/SKODA/SEAT V33.25”
Select “VW”
Read security code
4 Generation Immo
NEC+24C32 ICM
Make Ordinary Dealer Key.
Reading data …
Please connect RFID with diagnostic device
Please put the new key in RFID adapter.
Reading data …
Generating dealer key…
When you find the LED light on the RFID adapter flash on 3 time,the OBDSTAR H110 Programmer will prompt you “Make Dealer key success”
Attention Please:
If you find the warning massage with “Communication Breakdown”.Please check below conditions:
1.Ignition Switch is turned on
2.Mainline is connected
3.Battery has power
4.Is Equipped with this ….
OBDSTAR X300 DP PAD Programmer
From OBDSTAR Tools Technical Official Blog, post OBDSTAR H110 Program Key for VW Polo 2013 NEC 24C32
Sponsor Ads
About Tacry J. 
Auto Diagnostic Tool
5 connections, 2 recommendations, 111 honor points.Joined APSense since, May 3rd, 2017, From WA, United States.
Created on May 24th 2018 20:15. Viewed 325 times.
thanks for your sharing
May 29th 2018 23:27